8 open source boards using the TRF37A75
Real designs built with the TRF37A75, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Radar v2
ckflight
90.2 × 40 mm264 parts4LGPL-3.055Rf sig gen
joshajohnson
50 × 22.9 mm89 parts4LNo license52STM32
VNA
joshajohnson
100 × 66 mm207 parts2LGPL-3.025STM32
Radar v2
TonyStark2007
90.2 × 40 mm264 parts4LGPL-3.015NXP
Microwave-Transmitter
PeraZver
88.9 × 35.6 mm144 parts4LGPL-3.013HamShield1
EnhancedRadioDevices
53.3 × 68.6 mm157 parts2LNo license8HamShield09
EnhancedRadioDevices
53.3 × 68.6 mm169 parts2LNo license4TRF37A75 Dev Rev 0
joshajohnson
48 × 48 mm15 parts4LGPL-3.025
How designs wire the TRF37A75
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TRF37A75 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a capacitor to GND on 7 of 7 designs, most often 100 nF (then 10 nF).
- Pin 2 has a series capacitor on 7 of 7 designs, most often 1 nF (then 100 pF).
- Pin 7 has a inductor on 7 of 7 designs, most often 100 nH (then 220 nH).
- Pin 1 has a series resistor on 6 of 7 designs, most often 1.8 Ω (then 330 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: Signal 86% |
|
| Pin 2 | Connected to: Signal 100% |
|
| Pin 3 | Connected to: GND 86% | — |
| Pin 4 | Connected to: GND 86% | — |
| Pin 6 | Connected to: GND 86% | — |
| Pin 7 | Connected to: Signal 100% |
|
| Pin 8 | Connected to: GND 86% | — |
| Pin 9 | Connected to: GND 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Radar v2 by ckflight, Rf sig gen by joshajohnson, VNA by joshajohnson and Radar v2 by TonyStark2007.
The TRF37A75 in open source designs
The gallery holds 8 open source boards using the TRF37A75 from 7 GitHub repositories; a typical one measures about 71.1 × 44 mm and carries around 163 components.
63% use four copper layers or more, and 63% carry an open source license.
The most starred is Radar v2 by ckflight.
Parts used alongside the TRF37A75
What boards using the TRF37A75 are built for
TRF37A75: common questions
Where can I find a TRF37A75 reference design?
Each of the 8 boards on this page is a real design using the TRF37A75. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TRF37A75 pin 1 connected?
Pin 1 has a capacitor to GND on 7 of 7 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 7 open source designs using the TRF37A75.
How is the TRF37A75 pin 2 connected?
Pin 2 has a series capacitor on 7 of 7 designs, most often 1 nF (then 100 pF). Counted from the KiCad layouts of 7 open source designs using the TRF37A75.
How is the TRF37A75 pin 7 connected?
Pin 7 has a inductor on 7 of 7 designs, most often 100 nH (then 220 nH). Counted from the KiCad layouts of 7 open source designs using the TRF37A75.
What parts are used alongside the TRF37A75?
The MAX2871, 5400BL15B050E, AD8319, AD8591ARTZ-REEL7 and ADC_Connector appear in the most repositories here.
Which microcontrollers do boards using the TRF37A75 use?
Most are built on STM32 (3) and NXP (1).
How big is a typical board using the TRF37A75?
The median is 71.1 × 44 mm, and 38% are two-layer designs.
What is the most popular open source board using the TRF37A75?
By GitHub stars, Radar v2 by ckflight, with 55 stars.
Can I simulate one of these boards using the TRF37A75 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.