7 open source boards using the TSOP4838
Real designs built with the TSOP4838, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
CMM2-JLC
Manawyrm
130 × 102 mm110 parts2LGPL-3.010Microchip SAM
Pine
hutscape
45.7 × 38.1 mm43 parts2LMIT7PIC
Pcb pi onoff
bablokb
65 × 30 mm29 parts2LCC-BY-SA-4.02RP2040/RP2350
Defcon badge
LastZactionHero
88 × 54 mm76 parts4LMIT0ESP32
FliphackV1
ChladpavPy
53 × 76 mm58 parts2LMIT0ESP32
KicadReleaseCI
lukasznowarkiewicz
28 × 20.1 mm49 parts4LGPL-2.00- schematic only · 10 partsESP32
OpenAC-IR
AlessandroBerrone
10 partsMIT0
How designs wire the TSOP4838
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TSOP4838 connects to, and the resistors, capacitors and other passives placed on it.
- The VS pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 2 | Connected to: GND 100% | — |
| VSpin 3 | Connected to: 3.3V 50% · a signal 50% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CMM2-JLC by Manawyrm, Pine by hutscape, Pcb pi onoff by bablokb and FliphackV1 by ChladpavPy.
The TSOP4838 in open source designs
The gallery holds 7 open source boards using the TSOP4838 from 7 GitHub repositories; a typical one measures about 59 × 46 mm and carries around 49 components.
67% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is CMM2-JLC by Manawyrm.
Microcontrollers on boards using the TSOP4838
What boards using the TSOP4838 are built for
TSOP4838: common questions
Where can I find a TSOP4838 reference design?
Each of the 7 boards on this page is a real design using the TSOP4838. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TSOP4838 VS pin?
The VS pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the TSOP4838.
Which microcontrollers do boards using the TSOP4838 use?
Most are built on ESP32 (3), PIC (1), RP2040/RP2350 (1) and Microchip SAM (1).
How big is a typical board using the TSOP4838?
The median is 59 × 46 mm, and 67% are two-layer designs.
What is the most popular open source board using the TSOP4838?
By GitHub stars, CMM2-JLC by Manawyrm, with 10 stars.
Can I simulate one of these boards using the TSOP4838 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.