5 open source boards using the TXS0104EPW

Real designs built with the TXS0104EPW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The TXS0104EPW in open source designs

The gallery holds 5 open source boards using the TXS0104EPW from 5 GitHub repositories; a typical one measures about 70.5 × 79.5 mm and carries around 61 components.

80% use four copper layers or more, and 60% carry an open source license.

The most starred is Tv070wxm hat by ScandentLLC.

Parts used alongside the TXS0104EPW

Microcontrollers on boards using the TXS0104EPW

TXS0104EPW: common questions

Where can I find a TXS0104EPW reference design?

Each of the 5 boards on this page is a real design using the TXS0104EPW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the TXS0104EPW use?

Most are built on Raspberry Pi (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the TXS0104EPW?

The median is 70.5 × 79.5 mm, and 20% are two-layer designs.

What is the most popular open source board using the TXS0104EPW?

By GitHub stars, Tv070wxm hat by ScandentLLC, with 108 stars.

Can I simulate one of these boards using the TXS0104EPW before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part