12 open source boards using the UCC27517DBVR
Real designs built with the UCC27517DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
HF-PA-v10
kholia
89.3 × 63.5 mm55 parts2LNo license23RP2040/RP2350
HF-PA-v10
kholia
90 × 99.9 mm97 parts2LGPL-3.06ESP32
Avalanche32
AronASzucs
137 × 84 mm81 parts2LNo license3- schematic only · 70 partsESP32
ESP32-Geiger-Counter
AronASzucs
70 partsNo license3 LV Board Mk2
Lafayette-Motorsports
263 × 139.8 mm178 parts4LNo license1ESP32
CAN-HBC-S3
ViktorNfa
70 × 50 mm160 parts4LNo license1TIGP class board 2026 - main board
TIGP-Experimental-Methods
180 × 100 mm318 parts4LNo license0ESP32
Controller core reva
itorralbo
141.6 × 135.2 mm187 parts4LMIT0STM32
BATTERY ISOLATOR V1.1
Just-smart-enough
56 × 50 mm44 parts2LMIT0- schematic only · 159 parts
SmartBMS Active balancing
koko69420
159 partsNo license0 Hermes-Lite 2.0
kholia
105 × 55 mm33 parts2LNo license23Gatedriver
Steezyeffect
29.7 × 17 mm5 parts4LNo license0
How designs wire the UCC27517DBVR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the UCC27517DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 10 µF).
- The OUT pin has a series resistor on 7 of 9 designs, most often 10 Ω (then 3.3 Ω).
- The IN- pin is tied to GND on 8 of 9 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VDDpin 1 | Connected to: 12V 67% · a signal 33% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| IN-pin 4 | Connected to: GND 89% | — |
| OUTpin 5 | Connected to: Signal 89% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include HF-PA-v10 by kholia, HF-PA-v10 by kholia, Avalanche32 by AronASzucs and LV Board Mk2 by Lafayette-Motorsports.
The UCC27517DBVR in open source designs
The gallery holds 12 open source boards using the UCC27517DBVR from 11 GitHub repositories; a typical one measures about 97.5 × 73.8 mm and carries around 89 components.
50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is HF-PA-v10 by kholia.
Parts used alongside the UCC27517DBVR
Microcontrollers on boards using the UCC27517DBVR
What boards using the UCC27517DBVR are built for
UCC27517DBVR: common questions
Where can I find a UCC27517DBVR reference design?
Each of the 12 boards on this page is a real design using the UCC27517DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the UCC27517DBVR VDD pin?
The VDD pin has a decoupling capacitor on 7 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the UCC27517DBVR.
What resistor goes on the UCC27517DBVR OUT pin?
The OUT pin has a series resistor on 7 of 9 designs, most often 10 Ω (then 3.3 Ω). Counted from the KiCad layouts of 9 open source designs using the UCC27517DBVR.
How is the UCC27517DBVR IN- pin connected?
The IN- pin is tied to GND on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the UCC27517DBVR.
What parts are used alongside the UCC27517DBVR?
The USBLC6-2SC6, AMS1117-3.3, AP63203WU, BQ25886RGE and ESP32-S3-WROOM-1 appear in the most repositories here.
Which microcontrollers do boards using the UCC27517DBVR use?
Most are built on ESP32 (4), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the UCC27517DBVR?
The median is 97.5 × 73.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the UCC27517DBVR?
By GitHub stars, HF-PA-v10 by kholia, with 23 stars.
Can I simulate one of these boards using the UCC27517DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.