5 open source boards using the YM2203
Real designs built with the YM2203, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Zx multisound
UzixLS
170 × 64 mm173 parts2LMIT37Zx sizif-512-ext
UzixLS
213 × 64 mm145 parts2LMIT19AVR/Arduino
Peripheral board
Lintaroh
165 × 135 mm145 parts2LMIT0Ym bard 2203
ole00
92.7 × 88.9 mm62 parts2LNo license0Zoxnoxious 2203 FM Operator Type-N (OPN)
brer-rabbit
80 × 80 mm34 parts4LGPL-3.068
How designs wire the YM2203
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the YM2203 connects to, and the resistors, capacitors and other passives placed on it.
- The CH_C pin has a series capacitor on 4 of 5 designs, most often 10 µF (then 1 µF).
- The CH_B pin has a series capacitor on 4 of 5 designs, most often 10 µF (then 1 µF).
- The CH_A pin has a series capacitor on 4 of 5 designs, most often 10 µF (then 1 µF).
- The VDD pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| IOA7pin 9 | Connected to: Not connected 80% · a signal 20% | — |
| IOA6pin 10 | Connected to: Not connected 80% · a signal 20% | — |
| IOA5pin 11 | Connected to: Not connected 80% · a signal 20% | — |
| IOA4pin 12 | Connected to: Not connected 80% · a signal 20% | — |
| IOA3pin 13 | Connected to: Not connected 60% · a signal 40% | — |
| IOA2pin 14 | Connected to: Not connected 60% · a signal 40% | — |
| IOA1pin 15 | Connected to: Not connected 60% · a signal 40% |
|
| IOA0pin 16 | Connected to: Not connected 80% · a signal 20% | — |
| AGNDpin 17 | Connected to: GND 100% | — |
| CH_Cpin 18 | Connected to: Signal 100% |
|
| CH_Bpin 19 | Connected to: Signal 100% |
|
| CH_Apin 20 | Connected to: Signal 100% |
|
| VDDpin 21 | Connected to: 5V 100% |
|
| OP-Opin 23 | Connected to: Signal 100% |
|
| IRQpin 25 | Connected to: Not connected 80% · a signal 20% | — |
| IOB0pin 26 | Connected to: Not connected 80% · a signal 20% | — |
| IOB1pin 27 | Connected to: Not connected 80% · a signal 20% | — |
| IOB2pin 28 | Connected to: Not connected 80% · a signal 20% | — |
| IOB3pin 29 | Connected to: Not connected 80% · a signal 20% | — |
| IOB4pin 30 | Connected to: Not connected 80% · a signal 20% | — |
| IOB5pin 31 | Connected to: Not connected 80% · a signal 20% | — |
| IOB6pin 32 | Connected to: Not connected 80% · a signal 20% | — |
| IOB7pin 33 | Connected to: Not connected 80% · a signal 20% | — |
16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zoxnoxious 2203 FM Operator Type-N (OPN) by brer-rabbit, Zx multisound by UzixLS, Zx sizif-512-ext by UzixLS and Peripheral board by Lintaroh.
The YM2203 in open source designs
The gallery holds 5 open source boards using the YM2203 from 5 GitHub repositories; a typical one measures about 165 × 80 mm and carries around 145 components.
80% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is Zoxnoxious 2203 FM Operator Type-N (OPN) by brer-rabbit.
Parts used alongside the YM2203
Microcontrollers on boards using the YM2203
What boards using the YM2203 are built for
YM2203: common questions
Where can I find a YM2203 reference design?
Each of the 5 boards on this page is a real design using the YM2203. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the YM2203 CH_C pin connected?
The CH_C pin has a series capacitor on 4 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the YM2203.
How is the YM2203 CH_B pin connected?
The CH_B pin has a series capacitor on 4 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the YM2203.
How is the YM2203 CH_A pin connected?
The CH_A pin has a series capacitor on 4 of 5 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the YM2203.
What parts are used alongside the YM2203?
The YM3014B, 27C512, EPM3256ATC144, SAA1099 and SAM2695 appear in the most repositories here.
Which microcontrollers do boards using the YM2203 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the YM2203?
The median is 165 × 80 mm, and 80% are two-layer designs.
What is the most popular open source board using the YM2203?
By GitHub stars, Zoxnoxious 2203 FM Operator Type-N (OPN) by brer-rabbit, with 68 stars.
Can I simulate one of these boards using the YM2203 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.