8 open source boards using the YM3014B
Real designs built with the YM3014B, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687Zx multisound
UzixLS
170 × 64 mm173 parts2LMIT37Zx sizif-512-ext
UzixLS
213 × 64 mm145 parts2LMIT19Snark barker
Vakon84
231.1 × 106.7 mm193 parts2LNo license0Ym bard 2203
ole00
92.7 × 88.9 mm62 parts2LNo license0TI-CUBE-FMSound
VE7PMC
99.7 × 99.7 mm38 parts4LGPL-3.010Yatabaza synth
ycwn
46.4 × 60.3 mm31 parts2LGPL-3.01YM2203 (OPN) Board
46nori
80 × 50 mm17 parts2LMIT0
How designs wire the YM3014B
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the YM3014B connects to, and the resistors, capacitors and other passives placed on it.
- The RB pin has a capacitor to GND on 8 of 8 designs, most often 10 µF (then 100 nF).
- The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF.
- The MP pin has a capacitor to GND on 4 of 8 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 1 | Connected to: 5V 100% |
|
| TOBUFFpin 2 | Connected to: NJM3403A 25% |
|
| GNDpin 6 | Connected to: GND 100% | — |
| RBpin 7 | Connected to: NJM3403A 25% |
|
| MPpin 8 | Connected to: NJM3403A 25% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Snark barker by schlae, Zx multisound by UzixLS, Zx sizif-512-ext by UzixLS and TI-CUBE-FMSound by VE7PMC.
The YM3014B in open source designs
The gallery holds 8 open source boards using the YM3014B from 8 GitHub repositories; a typical one measures about 134.8 × 76.5 mm and carries around 104 components.
88% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.
The most starred is Snark barker by schlae.
Parts used alongside the YM3014B
What boards using the YM3014B are built for
YM3014B: common questions
Where can I find a YM3014B reference design?
Each of the 8 boards on this page is a real design using the YM3014B. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the YM3014B RB pin connected?
The RB pin has a capacitor to GND on 8 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the YM3014B.
What decoupling capacitors do designs use on the YM3014B VCC pin?
The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF. Counted from the KiCad layouts of 8 open source designs using the YM3014B.
How is the YM3014B MP pin connected?
The MP pin has a capacitor to GND on 4 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the YM3014B.
What parts are used alongside the YM3014B?
The SAA1099, YM3812, LM324, YM2203 and 27C512 appear in the most repositories here.
How big is a typical board using the YM3014B?
The median is 134.8 × 76.5 mm, and 88% are two-layer designs.
What is the most popular open source board using the YM3014B?
By GitHub stars, Snark barker by schlae, with 687 stars.
Can I simulate one of these boards using the YM3014B before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.