17 open source boards using the 74AHC1G32
Real designs built with the 74AHC1G32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266Window-Door sensor-Version-5
gadjet
31.5 × 20.6 mm30 parts2LGPL-2.070
SDGecko-2.0
silverstee1
30 × 30.5 mm7 parts2LUnlicense17
GC2SD-2.0
32.2 × 42 mm5 parts2LUnlicense10
WiiSD-2.0
30.7 × 36.8 mm3 parts2LUnlicense5
CPU2908CP4
m-okada
240 × 195 mm590 parts2LNo license3
GCM
JonathSpirit
203 × 116 mm123 parts4LCERN-OHL-W-2.03
NXPDropbot control board.
sci-bots
115 × 92 mm141 partsCustom license1
Cpu board 03
sim82
99.1 × 94.2 mm63 parts2LMIT1
MM1 SRAM 64k A
51.5 × 34 mm9 parts2LCERN-OHL-W-2.01
Analog via
starlingcode
213.5 × 128.5 mm269 parts4LCC-BY-NC-4.00
AVR/ArduinoAutomata Generator Minimal
Sirawit7205
128.3 × 71.8 mm103 parts2LNo license2
Cpu board 03 4l
99.1 × 94.2 mm62 parts4LMIT1
CPU2908C3
240 × 180 mm581 parts2LNo license3
TTSI
LSUTigerRacing
71 × 46 mm32 parts2LNo license7
Com board 01
94.3 × 40.9 mm14 parts2LMIT1
Zilog MultiSerial
roberto314
100 × 100 mm42 parts2LNo license1
Min uart board 01
99.1 × 34.5 mm11 parts2LMIT1
The 74AHC1G32 in open source designs
The gallery holds 17 open source boards using the 74AHC1G32 from 13 GitHub repositories; a typical one measures about 99.1 × 71.8 mm and carries around 42 components.
81% are two-layer designs, the rest use four layers or more, and 59% carry an open source license.
The most starred is Window-Door sensor-Version-5 by gadjet.
Parts used alongside the 74AHC1G32
Microcontrollers on boards using the 74AHC1G32
What boards using the 74AHC1G32 are built for
74AHC1G32: common questions
Where can I find a 74AHC1G32 reference design?
Each of the 17 boards on this page is a real design using the 74AHC1G32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the 74AHC1G32?
The 74AHC1G04, 74AHC1G08, 74AHC1G86, 74HC14 and 74HC157 appear in the most repositories here.
Which microcontrollers do boards using the 74AHC1G32 use?
Most are built on AVR/Arduino (1), ESP8266 (1) and NXP (1).
How big is a typical board using the 74AHC1G32?
The median is 99.1 × 71.8 mm, and 81% are two-layer designs.
What is the most popular open source board using the 74AHC1G32?
By GitHub stars, Window-Door sensor-Version-5 by gadjet, with 70 stars.
Can I simulate one of these boards using the 74AHC1G32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.