27 open source boards using the 74AHC1G32
Real designs built with the 74AHC1G32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Window-Door sensor-Version-5
gadjet
31.5 × 20.6 mm30 parts2LGPL-2.070SDGecko-2.0
silverstee1
30 × 30.5 mm7 parts2LUnlicense17GC2SD-2.0
silverstee1
32.2 × 42 mm5 parts2LUnlicense10WiiSD-2.0
silverstee1
30.7 × 36.8 mm3 parts2LUnlicense5CPU2908CP4
m-okada
240 × 195 mm590 parts2LNo license3GCM
JonathSpirit
203 × 116 mm123 parts4LCERN-OHL-W-2.03NXP
Dropbot control board.
sci-bots
115 × 92 mm141 partsCustom license1AOS16 Control Unit
AJain9199
90 × 88 mm121 parts4LNo license1Cpu board 03
sim82
99.1 × 94.2 mm63 parts2LMIT1MM1 SRAM 64k A
JonathSpirit
51.5 × 34 mm9 parts2LCERN-OHL-W-2.01Analog via
starlingcode
213.5 × 128.5 mm269 parts4LCC-BY-NC-4.00AVR/Arduino
Monodiffuse
elixpo
35.8 × 34 mm46 parts2LMIT0- schematic only · 9 parts
Circuitos umg
jhosef-re
9 partsNo license0 AVR/Arduino
Automata Generator Minimal
Sirawit7205
128.3 × 71.8 mm103 parts2LNo license2Cpu board 03 4l
sim82
99.1 × 94.2 mm62 parts4LMIT1Stencil
jerry-kerenzikov
82 × 80 mm169 parts4LCERN-OHL-S-2.00TTSI
JacobParent7
71 × 46 mm32 parts2LNo license4CPU2908C3
m-okada
240 × 180 mm581 parts2LNo license3Batt Boardv1
UChicago-Space-Program
90.2 × 95.9 mm55 parts2LNo license18-bit register
jerry-kerenzikov
100 × 51.9 mm65 parts4LCERN-OHL-S-2.00RP2040/RP2350
SD-board pico
Lintaroh
100 × 135 mm51 parts2LMIT0Memory Controller
AJain9199
88 × 86 mm49 parts4LNo license1TTSI
LSUTigerRacing
71 × 46 mm32 parts2LNo license7Com board 01
sim82
94.3 × 40.9 mm14 parts2LMIT1Zilog MultiSerial
roberto314
100 × 100 mm42 parts2LNo license1Min uart board 01
sim82
99.1 × 34.5 mm11 parts2LMIT1Reg4x16
AJain9199
35 × 60 mm22 parts2LNo license1
How designs wire the 74AHC1G32
Read from the KiCad layouts of 19 open source designs, one per repository: what each pin of the 74AHC1G32 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 8 of 18 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3 | Connected to: GND 100% | — |
| VCCpin 5 | Connected to: 5V 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Window-Door sensor-Version-5 by gadjet, SDGecko-2.0 by silverstee1, GC2SD-2.0 by silverstee1 and TTSI by LSUTigerRacing.
The 74AHC1G32 in open source designs
The gallery holds 27 open source boards using the 74AHC1G32 from 20 GitHub repositories; a typical one measures about 92.2 × 75.9 mm and carries around 49 components.
72% are two-layer designs, the rest use four layers or more, and 52% carry an open source license.
The most starred is Window-Door sensor-Version-5 by gadjet.
Parts used alongside the 74AHC1G32
Microcontrollers on boards using the 74AHC1G32
What boards using the 74AHC1G32 are built for
74AHC1G32: common questions
Where can I find a 74AHC1G32 reference design?
Each of the 27 boards on this page is a real design using the 74AHC1G32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AHC1G32 VCC pin?
The VCC pin has a decoupling capacitor on 8 of 18 designs, most often 100 nF. Counted from the KiCad layouts of 19 open source designs using the 74AHC1G32.
What parts are used alongside the 74AHC1G32?
The 74AHC1G04, 74AHC1G08, 74AHC1G86, 641964-1 and 74AHC1G00 appear in the most repositories here.
Which microcontrollers do boards using the 74AHC1G32 use?
Most are built on AVR/Arduino (2), ESP8266 (1), NXP (1) and RP2040/RP2350 (1).
How big is a typical board using the 74AHC1G32?
The median is 92.2 × 75.9 mm, and 72% are two-layer designs.
What is the most popular open source board using the 74AHC1G32?
By GitHub stars, Window-Door sensor-Version-5 by gadjet, with 70 stars.
Can I simulate one of these boards using the 74AHC1G32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.