11 open source boards using the 74AHC1G86
Real designs built with the 74AHC1G86, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP8266
Window-Door sensor-Version-5
gadjet
31.5 × 20.6 mm30 parts2LGPL-2.070AVR/Arduino
SmartElevatorSystem
anwaypimpalkar
52.1 × 107.8 mm24 parts4LNo license68b alu slice
tmarhguy
235 × 202.4 mm1088 parts4LSHL-2.12Analog via
starlingcode
213.5 × 128.5 mm269 parts4LCC-BY-NC-4.00PIC
DCC-Booster
DavidMFlynn
102.9 × 99.1 mm118 parts2LGPL-3.00STM32
3-Axis-Gimbal
IsmaHaikal0910
28 × 40 mm73 parts4LNo license0- schematic only · 9 parts
Circuitos umg
jhosef-re
9 partsNo license0 GPIO
89Mods
209.6 × 108.5 mm113 parts4LMIT2AVR/Arduino
Automata Generator Minimal
Sirawit7205
128.3 × 71.8 mm103 parts2LNo license2STM32
Tinyfc core
wangyeee
36 × 44 mm103 parts4LBSD-3-Clause9STM32
LoRaModem
wangyeee
24 × 36 mm48 parts2LBSD-3-Clause9
How designs wire the 74AHC1G86
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the 74AHC1G86 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3 | Connected to: GND 100% | — |
| VCCpin 5 | Connected to: 5V 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Window-Door sensor-Version-5 by gadjet, LoRaModem by wangyeee, SmartElevatorSystem by anwaypimpalkar and GPIO by 89Mods.
The 74AHC1G86 in open source designs
The gallery holds 11 open source boards using the 74AHC1G86 from 10 GitHub repositories; a typical one measures about 77.5 × 85.4 mm and carries around 103 components.
60% use four copper layers or more, and 45% carry an open source license.
The most starred is Window-Door sensor-Version-5 by gadjet.
Parts used alongside the 74AHC1G86
Microcontrollers on boards using the 74AHC1G86
What boards using the 74AHC1G86 are built for
74AHC1G86: common questions
Where can I find a 74AHC1G86 reference design?
Each of the 11 boards on this page is a real design using the 74AHC1G86. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AHC1G86 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the 74AHC1G86.
What parts are used alongside the 74AHC1G86?
The 74AHC1G32, 74AHC1G04, 74HC157, 74HC74 and AMS1117-3.3 appear in the most repositories here.
Which microcontrollers do boards using the 74AHC1G86 use?
Most are built on STM32 (3), AVR/Arduino (2), ESP8266 (1) and PIC (1).
How big is a typical board using the 74AHC1G86?
The median is 77.5 × 85.4 mm, and 40% are two-layer designs.
What is the most popular open source board using the 74AHC1G86?
By GitHub stars, Window-Door sensor-Version-5 by gadjet, with 70 stars.
Can I simulate one of these boards using the 74AHC1G86 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.