11 open source boards using the ARDUINO_NANO_ESP32
Real designs built with the ARDUINO_NANO_ESP32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoController board
andia89
69 × 54 mm73 parts2LNo license6
AVR/ArduinoKOTH V2
Salted-Peanuts
100 × 100 mm41 parts4LMIT4
AVR/ArduinoPCB-Domestic-Vibration---Motion-Sensor
MbFredys
30.6 × 47 mm10 parts2LMIT2
AVR/ArduinoHSOD-Home-Security-Of-DOOM
NattDocumented
94.6 × 120.6 mm35 parts2LNo license1
AVR/ArduinoFull Circuit
EthanSousaProjects
110 × 110 mm72 parts2LGPL-3.00
AVR/ArduinoNerf timer
75.9 × 93.5 mm30 parts4LMIT4
AVR/ArduinoCicuit Bar
67.9 × 55.7 mm18 parts2LGPL-3.00
ESP32PCB3 Contoller
ahaimour2005
35 × 70 mm8 parts2LMIT0
AVR/ArduinoCircuit Pulse Count
61 × 54.7 mm5 parts2LGPL-3.00
AVR/ArduinoCircuit Stepper
67.1 × 58.4 mm4 parts2LGPL-3.00
AVR/ArduinoCircuit GPS
41.2 × 50.3 mm3 parts2LGPL-3.00
The ARDUINO_NANO_ESP32 in open source designs
The gallery holds 11 open source boards using the ARDUINO_NANO_ESP32 from 6 GitHub repositories; a typical one measures about 67.9 × 58.4 mm and carries around 18 components.
82% are two-layer designs, the rest use four layers or more, and 82% carry an open source license.
The most starred is Controller board by andia89.
Microcontrollers on boards using the ARDUINO_NANO_ESP32
What boards using the ARDUINO_NANO_ESP32 are built for
ARDUINO_NANO_ESP32: common questions
Where can I find a ARDUINO_NANO_ESP32 reference design?
Each of the 11 boards on this page is a real design using the ARDUINO_NANO_ESP32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ARDUINO_NANO_ESP32 use?
Most are built on AVR/Arduino (10) and ESP32 (1).
How big is a typical board using the ARDUINO_NANO_ESP32?
The median is 67.9 × 58.4 mm, and 82% are two-layer designs.
What is the most popular open source board using the ARDUINO_NANO_ESP32?
By GitHub stars, Controller board by andia89, with 6 stars.
Can I simulate one of these boards using the ARDUINO_NANO_ESP32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.