4 open source boards using the AT7456E
Real designs built with the AT7456E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Dragonfly
Broccoliux
66 × 58.8 mm226 parts4LMIT2
STM32Fpv drone
AQUA-Warrior
37 × 37 mm106 parts4LCC-BY-SA-4.02
STM32Vayu-F722
ishantmahatopro
42 × 42 mm137 parts4LMIT0
ESP32VENDETTAFC
Caped-Crussader
43.6 × 43 mm129 parts6LCERN-OHL-S-2.028
The AT7456E in open source designs
The gallery holds 4 open source boards using the AT7456E from 4 GitHub repositories; a typical one measures about 42.8 × 42.5 mm and carries around 133 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is VENDETTAFC by Caped-Crussader.
Parts used alongside the AT7456E
What boards using the AT7456E are built for
AT7456E: common questions
Where can I find a AT7456E reference design?
Each of the 4 boards on this page is a real design using the AT7456E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AT7456E?
The ICM-42688-P, USBLC6-2SC6, BMP388, STM32F722RET6 and W25Q128JVSIQ appear in the most repositories here.
Which microcontrollers do boards using the AT7456E use?
Most are built on STM32 (3) and ESP32 (1).
How big is a typical board using the AT7456E?
The median is 42.8 × 42.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the AT7456E?
By GitHub stars, VENDETTAFC by Caped-Crussader, with 28 stars.
Can I simulate one of these boards using the AT7456E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.