17 open source boards using the ATmega328PB-A
Real designs built with the ATmega328PB-A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350C64pico
silvervest
102 × 81.5 mm93 parts2LCERN-OHL-S-2.087
AVR/ArduinoLockLoop
rmingon
37 × 49 mm34 parts2LCERN-OHL-P-2.03
AVR/ArduinoNespole
coddingtonbear
87.9 × 54.9 mm50 parts2LNo license2
AVR/ArduinoControl panel
lucanastasio
65 × 58 mm158 parts2LNo license1
AVR/ArduinoTuner
dl9lj
81 × 55 mm26 parts2LMIT1
AVR/ArduinoQueue-Local-Display-ATmega328PB
ByNS-KARACA
340 × 100 mm188 parts2LNo license0
AVR/ArduinoATmega328 control Board
olexsu
124 × 89.4 mm129 parts4LMIT0
AVR/ArduinoServoBoard
jeffrey500
82.8 × 53.3 mm66 parts2LNo license0
AVR/ArduinoFinal Board v3D
Petros-Kapetanios
79.3 × 87.5 mm59 parts4LNo license0
AVR/ArduinoDL-FinalProject
adbik4
57 × 55.8 mm33 parts2LNo license0
AVR/ArduinoCamera stabilization hardware
36 × 32 mm18 parts2LNo license10
AVR/ArduinoSwing
50 × 50 mm146 parts4LNo license1
AVR/ArduinoElektroniikkapaja vastaanotin
ripaskajaska
77 × 77 mm58 parts2LNo license0
AVR/ArduinoHeating controller
100 × 50 mm145 parts2LNo license1
AVR/ArduinoFinal Board v3-triple transformer
79.3 × 87.5 mm52 parts2LNo license0
AVR/ArduinoRoom hub
50 × 50 mm121 parts2LNo license1
AVR/ArduinoPsu monitor
dragonlock2
67 × 28 mm94 parts2LApache-2.013
The ATmega328PB-A in open source designs
The gallery holds 17 open source boards using the ATmega328PB-A from 13 GitHub repositories; a typical one measures about 79.3 × 55 mm and carries around 66 components.
82% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is C64pico by silvervest.
Parts used alongside the ATmega328PB-A
Microcontrollers on boards using the ATmega328PB-A
What boards using the ATmega328PB-A are built for
ATmega328PB-A: common questions
Where can I find a ATmega328PB-A reference design?
Each of the 17 boards on this page is a real design using the ATmega328PB-A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ATmega328PB-A use?
Most are built on AVR/Arduino (16) and RP2040/RP2350 (1).
How big is a typical board using the ATmega328PB-A?
The median is 79.3 × 55 mm, and 82% are two-layer designs.
What is the most popular open source board using the ATmega328PB-A?
By GitHub stars, C64pico by silvervest, with 87 stars.
Can I simulate one of these boards using the ATmega328PB-A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.