3 open source boards using the BMP580
Real designs built with the BMP580, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Simpleflightcontroller
notaroomba
40 × 46 mm79 parts2LNo license16
STM32STM32-FlightController
premvy
40 × 44.8 mm79 parts2LMIT1
STM32Flight controller
GodOfStrategy
77.4 × 45.1 mm78 parts2LNo license0
The BMP580 in open source designs
The gallery holds 3 open source boards using the BMP580 from 3 GitHub repositories; a typical one measures about 40 × 45 mm and carries around 79 components.
100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is Simpleflightcontroller by notaroomba.
Parts used alongside the BMP580
Microcontrollers on boards using the BMP580
What boards using the BMP580 are built for
BMP580: common questions
Where can I find a BMP580 reference design?
Each of the 3 boards on this page is a real design using the BMP580. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the BMP580?
The BQ25883RGER, ICM-45686, LMR51430, STM32F722RETX and TPS63070RNMR appear in the most repositories here.
Which microcontrollers do boards using the BMP580 use?
Most are built on STM32 (3).
How big is a typical board using the BMP580?
The median is 40 × 45 mm, and 100% are two-layer designs.
What is the most popular open source board using the BMP580?
By GitHub stars, Simpleflightcontroller by notaroomba, with 16 stars.
Can I simulate one of these boards using the BMP580 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.