9 open source boards using the ESP32-C3_SUPERMINI_TH
Real designs built with the ESP32-C3_SUPERMINI_TH, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32Pixel Dust
hackclub
136.9 × 148.5 mm402 parts2LNo license7- schematic only · 27 partsESP32
Sata psu
majabojarska
27 partsMIT2 
ESP32Chichi
jai-git4208
36 × 48.5 mm7 parts2LMIT1
RP2040/RP2350Irl raver
98 × 98 mm292 parts2LNo license7
ESP32Ledboard
100 × 100 mm235 parts2LNo license7
ESP32Pixle LED
84.3 × 97.1 mm146 parts2LNo license7
ESP32Pixel
95 × 85.8 mm80 parts2LNo license7
RP2040/RP2350Lightbox
87.5 × 66.9 mm67 parts2LNo license7
ESP32SuperPixel
97.4 × 94.8 mm38 parts2LNo license7
The ESP32-C3_SUPERMINI_TH in open source designs
The gallery holds 9 open source boards using the ESP32-C3_SUPERMINI_TH from 3 GitHub repositories; a typical one measures about 96.2 × 95.9 mm and carries around 80 components.
100% are two-layer designs, the rest use four layers or more, and 22% carry an open source license.
The most starred is Pixel Dust by hackclub.
Microcontrollers on boards using the ESP32-C3_SUPERMINI_TH
What boards using the ESP32-C3_SUPERMINI_TH are built for
ESP32-C3_SUPERMINI_TH: common questions
Where can I find a ESP32-C3_SUPERMINI_TH reference design?
Each of the 9 boards on this page is a real design using the ESP32-C3_SUPERMINI_TH. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the ESP32-C3_SUPERMINI_TH use?
Most are built on ESP32 (7) and RP2040/RP2350 (2).
How big is a typical board using the ESP32-C3_SUPERMINI_TH?
The median is 96.2 × 95.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the ESP32-C3_SUPERMINI_TH?
By GitHub stars, Pixel Dust by hackclub, with 7 stars.
Can I simulate one of these boards using the ESP32-C3_SUPERMINI_TH before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.