3 open source boards using the INA186A3IDCKR
Real designs built with the INA186A3IDCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenESC-20x20
OpenDrone-hw
31.2 × 33 mm180 parts6LCERN-OHL-S-2.0243
VENDETTAESC
Caped-Crussader
40.5 × 43 mm222 parts6LCERN-OHL-S-2.028
4in1
41.6 × 42.5 mm187 parts6LCERN-OHL-S-2.045
The INA186A3IDCKR in open source designs
The gallery holds 3 open source boards using the INA186A3IDCKR from 3 GitHub repositories; a typical one measures about 40.5 × 42.5 mm and carries around 187 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is OpenESC-20x20 by OpenDrone-hw.
Parts used alongside the INA186A3IDCKR
What boards using the INA186A3IDCKR are built for
INA186A3IDCKR: common questions
Where can I find a INA186A3IDCKR reference design?
Each of the 3 boards on this page is a real design using the INA186A3IDCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the INA186A3IDCKR?
The AT32F421G8U7, NSG2065Q, TLV76733DRVR, FTC160808S4R7MBCA and LMR54406DBVR appear in the most repositories here.
How big is a typical board using the INA186A3IDCKR?
The median is 40.5 × 42.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the INA186A3IDCKR?
By GitHub stars, OpenESC-20x20 by OpenDrone-hw, with 243 stars.
Can I simulate one of these boards using the INA186A3IDCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.