12 open source boards using the NSG2065Q
Real designs built with the NSG2065Q, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenESC-20x20
OpenDrone-hw
31.2 × 33 mm180 parts6LCERN-OHL-S-2.02764in1-panel
OpenDrone-hw
41.6 × 80.4 mm249 parts6LCERN-OHL-S-2.083VENDETTAESC
Caped-Crussader
40.5 × 43 mm222 parts6LCERN-OHL-S-2.028ESP32
OpenAIO
OpenDrone-hw
35 × 35 mm244 parts8LCERN-OHL-S-2.05Esc
cookiemonsternz
28.3 × 28.3 mm132 parts6LNo license5ESP32
DrikrAIO
tetraethylmethane
50 × 50 mm339 parts6LNo license14in1-panel
OliviezGit
41.6 × 80.4 mm249 parts6LCERN-OHL-S-2.004in1
OpenDrone-hw
41.6 × 42.5 mm187 parts6LCERN-OHL-S-2.0834in1-panel
tetraethylmethane
41.6 × 80.4 mm249 parts6LNo license14in1
OliviezGit
41.6 × 42.5 mm207 parts6LCERN-OHL-S-2.00ESP32
OpenAIO
tetraethylmethane
35 × 35 mm244 parts8LNo license14in1
tetraethylmethane
41.6 × 42.5 mm187 parts6LNo license1
How designs wire the NSG2065Q
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the NSG2065Q connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_4 pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 4.7 µF).
- The LO3_9 pin has a series resistor on 6 of 7 designs, most often 15 Ω (then 22 Ω).
- The LO2_10 pin has a series resistor on 6 of 7 designs, most often 15 Ω (then 22 Ω).
- The LO1_11 pin has a series resistor on 6 of 7 designs, most often 15 Ω (then 22 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCC_4pin 4 | Connected to: 10V 86% |
|
| NC_5pin 5 | Connected to: Not connected 86% | — |
| COM_6pin 6 | Connected to: GND 86% | — |
| NC_7pin 7 | Connected to: Not connected 86% | — |
| NC_8pin 8 | Connected to: Not connected 83% · GND 17% | — |
| LO3_9pin 9 | Connected to: Signal 100% |
|
| LO2_10pin 10 | Connected to: Signal 86% |
|
| LO1_11pin 11 | Connected to: Signal 100% |
|
| VS3_12pin 12 | Connected to: Another IC 71% |
|
| HO3_13pin 13 | Connected to: Signal 86% |
|
| VB3_14pin 14 | Connected to: Signal 100% |
|
| VS2_15pin 15 | Connected to: Another IC 83% |
|
| HO2_16pin 16 | Connected to: Signal 100% |
|
| VB2_17pin 17 | Connected to: Signal 100% |
|
| VS1_18pin 18 | Connected to: Another IC 83% |
|
| HO1_19pin 19 | Connected to: Signal 100% |
|
| VB1_20pin 20 | Connected to: Signal 100% |
|
| NC_21pin 21 | Connected to: Not connected 100% | — |
| COM_25pin 25 | Connected to: GND 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenESC-20x20 by OpenDrone-hw, 4in1 by OpenDrone-hw, VENDETTAESC by Caped-Crussader and Esc by cookiemonsternz.
The NSG2065Q in open source designs
The gallery holds 12 open source boards using the NSG2065Q from 7 GitHub repositories; a typical one measures about 41.6 × 42.5 mm and carries around 233 components.
100% use four copper layers or more, and 58% carry an open source license.
The most starred is OpenESC-20x20 by OpenDrone-hw.
Parts used alongside the NSG2065Q
Microcontrollers on boards using the NSG2065Q
What boards using the NSG2065Q are built for
NSG2065Q: common questions
Where can I find a NSG2065Q reference design?
Each of the 12 boards on this page is a real design using the NSG2065Q. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the NSG2065Q VCC_4 pin?
The VCC_4 pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the NSG2065Q.
What resistor goes on the NSG2065Q LO3_9 pin?
The LO3_9 pin has a series resistor on 6 of 7 designs, most often 15 Ω (then 22 Ω). Counted from the KiCad layouts of 7 open source designs using the NSG2065Q.
What resistor goes on the NSG2065Q LO2_10 pin?
The LO2_10 pin has a series resistor on 6 of 7 designs, most often 15 Ω (then 22 Ω). Counted from the KiCad layouts of 7 open source designs using the NSG2065Q.
What parts are used alongside the NSG2065Q?
The AT32F421G8U7, INA186A3IDCKR, TLV76733DRVR, FTC160808S4R7MBCA and LMR54406DBVR appear in the most repositories here.
Which microcontrollers do boards using the NSG2065Q use?
Most are built on ESP32 (3).
How big is a typical board using the NSG2065Q?
The median is 41.6 × 42.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the NSG2065Q?
By GitHub stars, OpenESC-20x20 by OpenDrone-hw, with 276 stars.
Can I simulate one of these boards using the NSG2065Q before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.