7 open source boards using the FTC160808S4R7MBCA
Real designs built with the FTC160808S4R7MBCA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenESC-20x20
OpenDrone-hw
31.2 × 33 mm180 parts6LCERN-OHL-S-2.0276ESP32
DrikrAIO
tetraethylmethane
50 × 50 mm339 parts6LNo license14in1-panel
OliviezGit
41.6 × 80.4 mm249 parts6LCERN-OHL-S-2.004in1
OpenDrone-hw
41.6 × 42.5 mm187 parts6LCERN-OHL-S-2.0834in1-panel
tetraethylmethane
41.6 × 80.4 mm249 parts6LNo license14in1
OliviezGit
41.6 × 42.5 mm207 parts6LCERN-OHL-S-2.004in1
tetraethylmethane
41.6 × 42.5 mm187 parts6LNo license1
The FTC160808S4R7MBCA in open source designs
The gallery holds 7 open source boards using the FTC160808S4R7MBCA from 4 GitHub repositories; a typical one measures about 41.6 × 42.5 mm and carries around 207 components.
100% use four copper layers or more, and 57% carry an open source license.
The most starred is OpenESC-20x20 by OpenDrone-hw.
Parts used alongside the FTC160808S4R7MBCA
Microcontrollers on boards using the FTC160808S4R7MBCA
What boards using the FTC160808S4R7MBCA are built for
FTC160808S4R7MBCA: common questions
Where can I find a FTC160808S4R7MBCA reference design?
Each of the 7 boards on this page is a real design using the FTC160808S4R7MBCA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the FTC160808S4R7MBCA?
The AT32F421G8U7, INA186A3IDCKR, LMR54406DBVR, NSG2065Q and TLV76733DRVR appear in the most repositories here.
Which microcontrollers do boards using the FTC160808S4R7MBCA use?
Most are built on ESP32 (1).
How big is a typical board using the FTC160808S4R7MBCA?
The median is 41.6 × 42.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the FTC160808S4R7MBCA?
By GitHub stars, OpenESC-20x20 by OpenDrone-hw, with 276 stars.
Can I simulate one of these boards using the FTC160808S4R7MBCA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.