14 open source boards using the AT32F421G8U7
Real designs built with the AT32F421G8U7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenESC-20x20
OpenDrone-hw
31.2 × 33 mm180 parts6LCERN-OHL-S-2.0276VENDETTAESC
Caped-Crussader
40.5 × 43 mm222 parts6LCERN-OHL-S-2.028ESP32
OpenAIO
OpenDrone-hw
35 × 35 mm244 parts8LCERN-OHL-S-2.05Esc
cookiemonsternz
28.3 × 28.3 mm132 parts6LNo license5STM32
Dragonfly
Broccoliux
66 × 58.8 mm226 parts4LMIT2ESP32
DrikrAIO
tetraethylmethane
50 × 50 mm339 parts6LNo license14in1-panel
OliviezGit
41.6 × 80.4 mm249 parts6LCERN-OHL-S-2.00STM32
Little drone-
Mariavrgs
66 × 58.8 mm226 parts4LMIT0Esc
vili111111p
39 × 43 mm184 parts4LNo license04in1
OpenDrone-hw
41.6 × 42.5 mm187 parts6LCERN-OHL-S-2.0834in1-panel
tetraethylmethane
41.6 × 80.4 mm249 parts6LNo license14in1
OliviezGit
41.6 × 42.5 mm207 parts6LCERN-OHL-S-2.00ESP32
OpenAIO
tetraethylmethane
35 × 35 mm244 parts8LNo license14in1
tetraethylmethane
41.6 × 42.5 mm187 parts6LNo license1
How designs wire the AT32F421G8U7
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the AT32F421G8U7 connects to, and the resistors, capacitors and other passives placed on it.
- The BOOT0_1 pin has a resistor to GND on 9 of 10 designs, most often 10 kΩ (then 1 kΩ).
- The PA0_6 pin has a resistor to GND on 9 of 9 designs, most often 1 kΩ.
- The PA0_6 pin has a series resistor on 9 of 9 designs, most often 10 kΩ.
- The PA1_7 pin has a series resistor on 9 of 9 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| BOOT0_1pin 1 | Connected to: Signal 90% |
|
| PF0/OSC_IN_2pin 2 | Connected to: Not connected 90% | — |
| PF1/OSC_OUT_3pin 3 | Connected to: Not connected 90% | — |
| NRST_4pin 4 | Connected to: Signal 90% |
|
| VDDA_5pin 5 | Connected to: VDDA 90% |
|
| PA0_6pin 6 | Connected to: Signal 100% |
|
| PA1_7pin 7 | Connected to: Signal 100% |
|
| PA3_9pin 9 | Connected to: Not connected 100% | — |
| PA4_10pin 10 | Connected to: Signal 100% |
|
| PA5_11pin 11 | Connected to: Signal 100% |
|
| PA6_12pin 12 | Connected to: Not connected 100% | — |
| VSS_16pin 16 | Connected to: GND 100% | — |
| VDD_17pin 17 | Connected to: 3.3V 100% |
|
| PA15_23pin 23 | Connected to: Not connected 100% | — |
| PB3_24pin 24 | Connected to: Not connected 100% | — |
| PB4_25pin 25 | Connected to: Signal 67% · not connected 33% |
|
| PB5_26pin 26 | Connected to: Not connected 100% | — |
| PB6_27pin 27 | Connected to: Not connected 100% | — |
| PB7_28pin 28 | Connected to: Not connected 100% | — |
| VSS_29pin 29 | Connected to: GND 100% | — |
9 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenESC-20x20 by OpenDrone-hw, 4in1 by OpenDrone-hw, VENDETTAESC by Caped-Crussader and Esc by cookiemonsternz.
The AT32F421G8U7 in open source designs
The gallery holds 14 open source boards using the AT32F421G8U7 from 10 GitHub repositories; a typical one measures about 41.6 × 42.8 mm and carries around 224 components.
100% use four copper layers or more, and 57% carry an open source license.
The most starred is OpenESC-20x20 by OpenDrone-hw.
Parts used alongside the AT32F421G8U7
What boards using the AT32F421G8U7 are built for
AT32F421G8U7: common questions
Where can I find a AT32F421G8U7 reference design?
Each of the 14 boards on this page is a real design using the AT32F421G8U7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the AT32F421G8U7 BOOT0_1 pin?
The BOOT0_1 pin has a resistor to GND on 9 of 10 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 10 open source designs using the AT32F421G8U7.
What resistor goes on the AT32F421G8U7 PA0_6 pin?
The PA0_6 pin has a resistor to GND on 9 of 9 designs, most often 1 kΩ. Counted from the KiCad layouts of 10 open source designs using the AT32F421G8U7.
What resistor goes on the AT32F421G8U7 PA1_7 pin?
The PA1_7 pin has a series resistor on 9 of 9 designs, most often 10 kΩ. Counted from the KiCad layouts of 10 open source designs using the AT32F421G8U7.
What parts are used alongside the AT32F421G8U7?
The NSG2065Q, INA186A3IDCKR, TLV76733DRVR, FTC160808S4R7MBCA and LMR54406DBVR appear in the most repositories here.
Which microcontrollers do boards using the AT32F421G8U7 use?
Most are built on ESP32 (3) and STM32 (2).
How big is a typical board using the AT32F421G8U7?
The median is 41.6 × 42.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the AT32F421G8U7?
By GitHub stars, OpenESC-20x20 by OpenDrone-hw, with 276 stars.
Can I simulate one of these boards using the AT32F421G8U7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.