3 open source boards using the LM35-NEB
Real designs built with the LM35-NEB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoSmartElevatorSystem
anwaypimpalkar
52.1 × 107.8 mm24 parts4LNo license6
ESP32Electricload
hnz1102
185 × 98 mm71 parts2LNo license5
ESP32Dcpower
58 × 90 mm101 parts2LNo license1
The LM35-NEB in open source designs
The gallery holds 3 open source boards using the LM35-NEB from 3 GitHub repositories; a typical one measures about 58 × 98 mm and carries around 71 components.
67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is SmartElevatorSystem by anwaypimpalkar.
Parts used alongside the LM35-NEB
Microcontrollers on boards using the LM35-NEB
What boards using the LM35-NEB are built for
LM35-NEB: common questions
Where can I find a LM35-NEB reference design?
Each of the 3 boards on this page is a real design using the LM35-NEB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LM35-NEB?
The ESP32-S3-WROOM-1-N16R8, INA228, OPA187IDBVR, SSD1331_DISPLAY and TSB611ILT appear in the most repositories here.
Which microcontrollers do boards using the LM35-NEB use?
Most are built on ESP32 (2) and AVR/Arduino (1).
How big is a typical board using the LM35-NEB?
The median is 58 × 98 mm, and 67% are two-layer designs.
What is the most popular open source board using the LM35-NEB?
By GitHub stars, SmartElevatorSystem by anwaypimpalkar, with 6 stars.
Can I simulate one of these boards using the LM35-NEB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.