10 open source boards using the MCP2551-I-SN
Real designs built with the MCP2551-I-SN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32GCode Buttons MCU
meteyou
50 × 20 mm50 parts4LGPL-3.02
AVR/ArduinoVehicle controL module 0.1.0
WATonomous
2.5 × 2.5 mm65 parts2LNo license1
STM32Den v3
makizusi
98 × 98 mm57 parts2LNo license0
AVR/ArduinoSensor interface 1.1.0
68.6 × 53.3 mm60 parts2LNo license1
STM32DM v3
98 × 98 mm57 parts2LNo license0
STM32NMEA2000Adapter-8.1
peterantypas
46 × 46 mm52 parts2LGPL-3.0444
AVR/ArduinoGateway r0
68.6 × 53.3 mm59 parts2LNo license1
STM32DD v8
100 × 60 mm50 parts2LNo license0
STM32運び屋用
90 × 70 mm24 parts2LNo license0
ESP32Vehicle Control Unit VCU V1
HKUST-Red-Bird-Racing-EVRT
80 × 66.7 mm54 parts2LNo license3
The MCP2551-I-SN in open source designs
The gallery holds 10 open source boards using the MCP2551-I-SN from 5 GitHub repositories; a typical one measures about 74.3 × 56.7 mm and carries around 56 components.
90% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is NMEA2000Adapter-8.1 by peterantypas.
Microcontrollers on boards using the MCP2551-I-SN
What boards using the MCP2551-I-SN are built for
MCP2551-I-SN: common questions
Where can I find a MCP2551-I-SN reference design?
Each of the 10 boards on this page is a real design using the MCP2551-I-SN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP2551-I-SN use?
Most are built on STM32 (6), AVR/Arduino (3) and ESP32 (1).
How big is a typical board using the MCP2551-I-SN?
The median is 74.3 × 56.7 mm, and 90% are two-layer designs.
What is the most popular open source board using the MCP2551-I-SN?
By GitHub stars, NMEA2000Adapter-8.1 by peterantypas, with 444 stars.
Can I simulate one of these boards using the MCP2551-I-SN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.