9 open source boards using the MMC5983MA
Real designs built with the MMC5983MA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Shirley-FC-Dev-Board
Bare-Metal-Foundry
56 × 46 mm110 parts4LNo license29
ESP32Rotini-Hardware
AlfredoSystems
47 × 21.6 mm105 parts4LMIT3
RP2040/RP2350StratosCore
pantojinho
60 × 84 mm245 parts4LNo license1
ESP32Altimeter
icl-rocketry
37.5 × 25 mm80 parts4LNo license1
STM32OshTelemega
Kev1n8088
30 × 80 mm151 parts4LNo license0
ESP32Altimeter thin
54.5 × 19 mm80 parts4LNo license1
ESP32Артёмитер
54.5 × 18 mm79 parts4LNo license1
STM32AVIONICS BOARD
MatthiasGeorgImhof
80 × 80 mm178 parts4LCC-BY-NC-4.00
ESP32Altimeter super thin
54.5 × 18 mm79 parts4LNo license1
The MMC5983MA in open source designs
The gallery holds 9 open source boards using the MMC5983MA from 6 GitHub repositories; a typical one measures about 54.5 × 25 mm and carries around 105 components.
100% use four copper layers or more, and 11% carry an open source license.
The most starred is Shirley-FC-Dev-Board by Bare-Metal-Foundry.
Parts used alongside the MMC5983MA
Microcontrollers on boards using the MMC5983MA
What boards using the MMC5983MA are built for
MMC5983MA: common questions
Where can I find a MMC5983MA reference design?
Each of the 9 boards on this page is a real design using the MMC5983MA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MMC5983MA use?
Most are built on ESP32 (5), STM32 (3) and RP2040/RP2350 (1).
How big is a typical board using the MMC5983MA?
The median is 54.5 × 25 mm, and 0% are two-layer designs.
What is the most popular open source board using the MMC5983MA?
By GitHub stars, Shirley-FC-Dev-Board by Bare-Metal-Foundry, with 29 stars.
Can I simulate one of these boards using the MMC5983MA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.