6 open source boards using the SN74LV1T34DCK

Real designs built with the SN74LV1T34DCK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filtersOpen license only|Most starred Recently updated Most components

The SN74LV1T34DCK in open source designs

The gallery holds 6 open source boards using the SN74LV1T34DCK from 5 GitHub repositories; a typical one measures about 76.2 × 73.8 mm and carries around 83 components.

83% use four copper layers or more, and 50% carry an open source license.

The most starred is 5V Development Board by efabless.

Parts used alongside the SN74LV1T34DCK

Microcontrollers on boards using the SN74LV1T34DCK

What boards using the SN74LV1T34DCK are built for

SN74LV1T34DCK: common questions

Where can I find a SN74LV1T34DCK reference design?

Each of the 6 boards on this page is a real design using the SN74LV1T34DCK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the SN74LV1T34DCK?

The W25Q32FVSS, AMS1117-3.3, AZ1117CH-1.8TRG1, FT232H and M.2-CONNECTOR-E appear in the most repositories here.

Which microcontrollers do boards using the SN74LV1T34DCK use?

Most are built on RISC-V (1) and RP2040/RP2350 (1).

How big is a typical board using the SN74LV1T34DCK?

The median is 76.2 × 73.8 mm, and 17% are two-layer designs.

What is the most popular open source board using the SN74LV1T34DCK?

By GitHub stars, 5V Development Board by efabless, with 40 stars.

Can I simulate one of these boards using the SN74LV1T34DCK before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

6 open source boards using the SN74LV1T34DCK

TART3 Motherboard

GPIO

Pico2350-W-ProLite-R2

5V Development Board