20 open source boards using the SN74LV1T34DCK
Real designs built with the SN74LV1T34DCK, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
DD Compute 2
Acmex2564
200 × 65 mm175 parts4LNo license19NuDAC
danchouzhou
63.5 × 22.9 mm57 parts4LMIT11STM32
RFB
Penta0308
48.2 × 50 mm226 parts6LNo license2YM3812-dual synth
89Mods
99.8 × 44.2 mm40 parts4LApache-2.01Eurobot 2025 carte mere
Les-opossums
87 × 85 mm306 parts4LNo license0STM32
STDC
SebastianThomas
38 × 48 mm120 parts4LNo license0As11-comp
AvalonSemiconductors
98.6 × 99.4 mm109 parts4LApache-2.00AS2650 board
AvalonSemiconductors
96.9 × 67.9 mm76 parts4LApache-2.00NXP
DD Compute 1
Acmex2564
200 × 65 mm167 parts2LNo license19RISC-V
TART3 Motherboard
tart-telescope
199.4 × 169 mm89 parts6LGPL-3.03GPIO
89Mods
209.6 × 108.5 mm113 parts4LMIT2RP2040/RP2350
Universal Power Delivery and Control Board
Oscyloskop444
99.5 × 69.3 mm174 parts4LGPL-3.00HW
AvalonSemiconductors
54.9 × 75.8 mm64 parts4LApache-2.00Gfmpw1-tholin riscv
AvalonSemiconductors
97.5 × 81.8 mm35 parts4LApache-2.00RP2040/RP2350
Pico2350-W-ProLite-R2
zeankundev
21 × 51 mm74 parts4LNo license15V Development Board
efabless
76.2 × 73.8 mm83 parts4LNo license405V Development Board
weyer7
76.2 × 73.8 mm83 parts4LNo license15V Development Board
chipfoundry
76.2 × 73.8 mm83 parts4LNo license15V Development Board
Rimal12345
76.2 × 73.8 mm83 parts4LNo license0TemperatureMonitor
89Mods
25.9 × 11.2 mm10 parts2LMIT2
How designs wire the SN74LV1T34DCK
Read from the KiCad layouts of 16 open source designs, one per repository: what each pin of the SN74LV1T34DCK connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 10 of 16 designs, most often 100 nF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 1 | Connected to: Not connected 100% | — |
| GNDpin 3 | Connected to: GND 100% | — |
| Ypin 4 | Connected to: W25Q32FVSS 31%, a connector 31% |
|
| VCCpin 5 | Connected to: 3.3V 94% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 5V Development Board by efabless, DD Compute 1 by Acmex2564, NuDAC by danchouzhou and TART3 Motherboard by tart-telescope.
The SN74LV1T34DCK in open source designs
The gallery holds 20 open source boards using the SN74LV1T34DCK from 16 GitHub repositories; a typical one measures about 81.6 × 71.6 mm and carries around 83 components.
90% use four copper layers or more, and 50% carry an open source license.
The most starred is 5V Development Board by efabless.
Parts used alongside the SN74LV1T34DCK
Microcontrollers on boards using the SN74LV1T34DCK
What boards using the SN74LV1T34DCK are built for
SN74LV1T34DCK: common questions
Where can I find a SN74LV1T34DCK reference design?
Each of the 20 boards on this page is a real design using the SN74LV1T34DCK. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LV1T34DCK VCC pin?
The VCC pin has a decoupling capacitor on 10 of 16 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 16 open source designs using the SN74LV1T34DCK.
What parts are used alongside the SN74LV1T34DCK?
The W25Q32FVSS, AZ1117CH-1.8TRG1, FT232H, M.2-CONNECTOR-E and NCP1117LPST33T3G appear in the most repositories here.
Which microcontrollers do boards using the SN74LV1T34DCK use?
Most are built on STM32 (3), RP2040/RP2350 (2), NXP (1) and RISC-V (1).
How big is a typical board using the SN74LV1T34DCK?
The median is 81.6 × 71.6 mm, and 10% are two-layer designs.
What is the most popular open source board using the SN74LV1T34DCK?
By GitHub stars, 5V Development Board by efabless, with 40 stars.
Can I simulate one of these boards using the SN74LV1T34DCK before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.