27 open source boards using the SN74LVC1G125DCKT

Real designs built with the SN74LVC1G125DCKT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

27 boardsClear filters|Most starred

How designs wire the SN74LVC1G125DCKT

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC1G125DCKT connects to, and the resistors, capacitors and other passives placed on it.

  • The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF.
  • The MR pin has a pull-up to 5V on 4 of 5 designs, most often 10 kΩ.
VSSpin 2Connected to: GND 80% · a signal 20%
MRpin 4Connected to: AZ1117CH-1.8TRG1 80%, a connector 80%
  • Pull-up to 5V on 80% · 10 kΩ (4)
VDDpin 5Connected to: 5V 100%
  • Decoupling capacitor on 100% · 100 nF (6)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 5V Development Board by efabless, 5V Development Board by chipfoundry, 5V Development Board by weyer7 and Caravel pcb by pohantw.

The SN74LVC1G125DCKT in open source designs

The gallery holds 27 open source boards using the SN74LVC1G125DCKT from 5 GitHub repositories; a typical one measures about 76.2 × 73.8 mm and carries around 84 components.

85% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Caravel-Nucleo v2-M.2 by efabless.

What boards using the SN74LVC1G125DCKT are built for

SN74LVC1G125DCKT: common questions

Where can I find a SN74LVC1G125DCKT reference design?

Each of the 27 boards on this page is a real design using the SN74LVC1G125DCKT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC1G125DCKT VDD pin?

The VDD pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G125DCKT.

What pull-up resistor is used on the SN74LVC1G125DCKT MR pin?

The MR pin has a pull-up to 5V on 4 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G125DCKT.

What parts are used alongside the SN74LVC1G125DCKT?

The 93C56, AZ1117CH-1.8TRG1, Caravel, caravel_breakout and FT232H appear in the most repositories here.

How big is a typical board using the SN74LVC1G125DCKT?

The median is 76.2 × 73.8 mm, and 85% are two-layer designs.

What is the most popular open source board using the SN74LVC1G125DCKT?

By GitHub stars, Caravel-Nucleo v2-M.2 by efabless, with 40 stars.

Can I simulate one of these boards using the SN74LVC1G125DCKT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part