5 open source boards using the STM32F722RETX

Real designs built with the STM32F722RETX, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

The STM32F722RETX in open source designs

The gallery holds 5 open source boards using the STM32F722RETX from 5 GitHub repositories; a typical one measures about 66 × 46 mm and carries around 79 components.

60% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.

The most starred is Simpleflightcontroller by notaroomba.

Parts used alongside the STM32F722RETX

Microcontrollers on boards using the STM32F722RETX

What boards using the STM32F722RETX are built for

STM32F722RETX: common questions

Where can I find a STM32F722RETX reference design?

Each of the 5 boards on this page is a real design using the STM32F722RETX. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the STM32F722RETX?

The ICM-45686, BMP580, BQ25883RGER, LMR51430 and TPS63070RNMR appear in the most repositories here.

Which microcontrollers do boards using the STM32F722RETX use?

Most are built on STM32 (4) and ESP32 (1).

How big is a typical board using the STM32F722RETX?

The median is 66 × 46 mm, and 60% are two-layer designs.

What is the most popular open source board using the STM32F722RETX?

By GitHub stars, Simpleflightcontroller by notaroomba, with 16 stars.

Can I simulate one of these boards using the STM32F722RETX before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part