11 open source boards using the TXB0108PWR
Real designs built with the TXB0108PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MC60
wyolum
60 × 70 mm97 parts2LNo license17- schematic only · 1 parts
Level shifter shield
ajokela
1 partsNo license1 
Arena 12-12 v8 ni
floesche
228.6 × 228.6 mm575 parts6LCC-BY-4.00
Heartthingv2 ecg
kermitsgonnakermicide
25.8 × 28.7 mm30 parts2LNo license0
NXPArena 12-12 Teensy Modular LED Display
228.6 × 228.6 mm441 parts6LCC-BY-4.00
STM32Sci board
MatthiasGeorgImhof
80 × 80 mm197 parts4LCC-BY-NC-4.00
Nordic nRFMCU V2
63 × 28 mm9 parts2LNo license0
Arena 12-12 v7 ni
228.6 × 228.6 mm120 parts6LCC-BY-4.00
NXP12-12 Teensy G4.1 Arena Modular LED Display
228.6 × 228.6 mm119 parts6LCC-BY-4.00
STM32Sci board wo switches
80 × 80 mm168 parts4LCC-BY-NC-4.00
STM32X1
embeddedalpha
30 × 80 mm57 parts2LMIT75
The TXB0108PWR in open source designs
The gallery holds 11 open source boards using the TXB0108PWR from 6 GitHub repositories; a typical one measures about 80 × 80 mm and carries around 119 components.
60% use four copper layers or more, and 45% carry an open source license.
The most starred is X1 by embeddedalpha.
Microcontrollers on boards using the TXB0108PWR
What boards using the TXB0108PWR are built for
TXB0108PWR: common questions
Where can I find a TXB0108PWR reference design?
Each of the 11 boards on this page is a real design using the TXB0108PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TXB0108PWR use?
Most are built on STM32 (3), NXP (2) and Nordic nRF (1).
How big is a typical board using the TXB0108PWR?
The median is 80 × 80 mm, and 40% are two-layer designs.
What is the most popular open source board using the TXB0108PWR?
By GitHub stars, X1 by embeddedalpha, with 75 stars.
Can I simulate one of these boards using the TXB0108PWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.