10 open source boards using the 74AC573
Real designs built with the 74AC573, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
65816-computer
mike42
169.7 × 99.8 mm92 parts4LNo license34OS816
c0pperdragon
76.7 × 76.7 mm36 parts4LNo license27AVR/Arduino
Z80Atmega128
46nori
170 × 130 mm105 parts4LGPL-3.09RP2040/RP2350
Control board
ljufa
175 × 172.2 mm97 parts2LMIT2Color
Noah1989
160 × 100 mm75 parts2LMIT2AVR/Arduino
8086-computer
EldadHellerman
94 × 90 mm146 parts2LNo license0Graphics
Noah1989
160 × 100 mm67 parts2LMIT265c816board
c0pperdragon
30.5 × 88.9 mm9 parts2LNo license20AVR/Arduino
CFT DFP Board
alexiosc
233.4 × 280 mm186 parts2LGPL-3.06AVR/Arduino
Debugging Front Panel
alexiosc
280 × 164.6 mm165 parts2LGPL-3.06
How designs wire the 74AC573
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74AC573 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: 5V 88% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 65816-computer by mike42, OS816 by c0pperdragon, 65c816board by c0pperdragon and Z80Atmega128 by 46nori.
The 74AC573 in open source designs
The gallery holds 10 open source boards using the 74AC573 from 8 GitHub repositories; a typical one measures about 164.8 × 100 mm and carries around 95 components.
70% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is 65816-computer by mike42.
Parts used alongside the 74AC573
Microcontrollers on boards using the 74AC573
What boards using the 74AC573 are built for
74AC573: common questions
Where can I find a 74AC573 reference design?
Each of the 10 boards on this page is a real design using the 74AC573. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74AC573 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the 74AC573.
What parts are used alongside the 74AC573?
The 74HC04, 74HC138, 74AC138, 74HC08 and 74HC245 appear in the most repositories here.
Which microcontrollers do boards using the 74AC573 use?
Most are built on AVR/Arduino (4) and RP2040/RP2350 (1).
How big is a typical board using the 74AC573?
The median is 164.8 × 100 mm, and 70% are two-layer designs.
What is the most popular open source board using the 74AC573?
By GitHub stars, 65816-computer by mike42, with 34 stars.
Can I simulate one of these boards using the 74AC573 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.