11 open source boards using the 74AHC1G00
Real designs built with the 74AHC1G00, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
MoleNet V7.1
ComNets-Bremen
106 × 66.8 mm70 parts4LGPL-3.013Fault Latch 2
JacobParent7
110 × 90 mm101 parts2LNo license4AOS16 Control Unit
AJain9199
90 × 88 mm121 parts4LNo license1ESP32
Voice-Assistance-MoleNet
ComNets-Bremen
106 × 66.8 mm65 parts4LMIT0Charging
JacobParent7
80 × 70 mm49 parts2LNo license4AOS16 GPU
AJain9199
81 × 60 mm106 parts4LNo license1Stencil
jerry-kerenzikov
82 × 80 mm169 parts4LCERN-OHL-S-2.00XboxUSB-C
Redherring32
87.4 × 19.5 mm16 parts4LTAPR-OHL-1.093Charging
LSUTigerRacing
80 × 70 mm49 parts2LNo license7RML
JacobParent7
85 × 50 mm25 parts4LNo license4Memory 64K
jerry-kerenzikov
100 × 51.9 mm59 parts4LCERN-OHL-S-2.00
How designs wire the 74AHC1G00
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74AHC1G00 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 2 has a pull-up to 5V on 3 of 7 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: The microcontroller 29%, SFH617A-1 29% |
|
| GNDpin 3 | Connected to: GND 71% · 5V 29% | — |
| VCCpin 5 | Connected to: 5V 71% · GND 29% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include XboxUSB-C by Redherring32, MoleNet V7.1 by ComNets-Bremen, Charging PCB by LSUTigerRacing and Charging PCB by JacobParent7.
The 74AHC1G00 in open source designs
The gallery holds 11 open source boards using the 74AHC1G00 from 7 GitHub repositories; a typical one measures about 87.4 × 66.8 mm and carries around 65 components.
73% use four copper layers or more, and 45% carry an open source license.
The most starred is XboxUSB-C by Redherring32.
Parts used alongside the 74AHC1G00
Microcontrollers on boards using the 74AHC1G00
What boards using the 74AHC1G00 are built for
74AHC1G00: common questions
Where can I find a 74AHC1G00 reference design?
Each of the 11 boards on this page is a real design using the 74AHC1G00. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the 74AHC1G00 pin 2?
Pin 2 has a pull-up to 5V on 3 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the 74AHC1G00.
What parts are used alongside the 74AHC1G00?
The 74AHC1G08, 74AHC1G32, 74LS279, 74LVC2G241 and BME280 appear in the most repositories here.
Which microcontrollers do boards using the 74AHC1G00 use?
Most are built on ESP32 (2).
How big is a typical board using the 74AHC1G00?
The median is 87.4 × 66.8 mm, and 27% are two-layer designs.
What is the most popular open source board using the 74AHC1G00?
By GitHub stars, XboxUSB-C by Redherring32, with 93 stars.
Can I simulate one of these boards using the 74AHC1G00 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.