8 open source boards using the 74LVC2G241

Real designs built with the 74LVC2G241, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the 74LVC2G241

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LVC2G241 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 7 has a resistor to GND on 6 of 6 designs, most often 10 kΩ.
  • Pin 1 has a resistor to GND on 4 of 6 designs, most often 10 kΩ.
  • Pin 2 has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ.
  • Pin 3 has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ.
Pin 1Connected to: The microcontroller 50%
  • Resistor to GND on 67% · 10 kΩ (4)
  • Pull-up to 3.3V on 50% · 10 kΩ (3)
Pin 2Connected to: A connector 67%, 74AHC1G00 33%
  • Pull-up to 3.3V on 67% · 10 kΩ (4)
Pin 3Connected to: A connector 67%
  • Pull-up to 3.3V on 67% · 10 kΩ (4)
GNDpin 4Connected to: GND 100%
Pin 6Connected to: A connector 67%
  • Pull-up to 5V on 67% · 10 kΩ (5)
Pin 7Connected to: The microcontroller 50%
  • Resistor to GND on 100% · 10 kΩ (6)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (4), 1 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MoleNet V7.1 by ComNets-Bremen, LARA hat by LuHer10, Voice-Assistance-MoleNet by ComNets-Bremen and AdafruitMetroESP32-DynamixelHat by dbd.

The 74LVC2G241 in open source designs

The gallery holds 8 open source boards using the 74LVC2G241 from 6 GitHub repositories; a typical one measures about 66 × 53.1 mm and carries around 44 components.

63% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is MoleNet V7.1 by ComNets-Bremen.

Microcontrollers on boards using the 74LVC2G241

74LVC2G241: common questions

Where can I find a 74LVC2G241 reference design?

Each of the 8 boards on this page is a real design using the 74LVC2G241. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 74LVC2G241 pin 7?

Pin 7 has a resistor to GND on 6 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the 74LVC2G241.

What resistor goes on the 74LVC2G241 pin 1?

Pin 1 has a resistor to GND on 4 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the 74LVC2G241.

What pull-up resistor is used on the 74LVC2G241 pin 2?

Pin 2 has a pull-up to 3.3V on 4 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the 74LVC2G241.

What parts are used alongside the 74LVC2G241?

The 74AHC1G00, BME280, ESP32-S3-WROOM-1, Lora Module and PC817 appear in the most repositories here.

Which microcontrollers do boards using the 74LVC2G241 use?

Most are built on Raspberry Pi (3), ESP32 (2), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the 74LVC2G241?

The median is 66 × 53.1 mm, and 63% are two-layer designs.

What is the most popular open source board using the 74LVC2G241?

By GitHub stars, MoleNet V7.1 by ComNets-Bremen, with 13 stars.

Can I simulate one of these boards using the 74LVC2G241 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part