6 open source boards using the 74HC151
Real designs built with the 74HC151, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Clock
ifilot
101.6 × 55.9 mm72 parts2LCERN-OHL-S-2.02Z80uPC
NaoPross
99.5 × 70 mm48 parts2LMIT0- schematic only · 558 parts
Breadboarding
MihrimatriX
558 partsMIT0 Sd
Noah1989
160 × 100 mm45 parts2LMIT2Stack Module
charlespax
89.2 × 62.9 mm16 parts2LMIT0ESP8266
IN16 optoToESP8266
LudovicLemarinel
50 × 50 mm16 partsNo license3
How designs wire the 74HC151
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HC151 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF.
- The E pin is tied to GND on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Epin 7 | Connected to: GND 60% · a signal 40% | — |
| GNDpin 8 | Connected to: GND 80% · not connected 20% | — |
| VCCpin 16 | Connected to: VCC 100% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include IN16 optoToESP8266 by LudovicLemarinel, Clock by ifilot, Sd by Noah1989 and Stack Module by charlespax.
The 74HC151 in open source designs
The gallery holds 6 open source boards using the 74HC151 from 6 GitHub repositories; a typical one measures about 99.5 × 62.9 mm and carries around 47 components.
100% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.
The most starred is IN16 optoToESP8266 by LudovicLemarinel.
Parts used alongside the 74HC151
Microcontrollers on boards using the 74HC151
What boards using the 74HC151 are built for
74HC151: common questions
Where can I find a 74HC151 reference design?
Each of the 6 boards on this page is a real design using the 74HC151. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC151 VCC pin?
The VCC pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the 74HC151.
How is the 74HC151 E pin connected?
The E pin is tied to GND on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 74HC151.
What parts are used alongside the 74HC151?
The 74HC00, 74HC02, 74HC08, 74HC138 and 74HC157 appear in the most repositories here.
Which microcontrollers do boards using the 74HC151 use?
Most are built on ESP8266 (1).
How big is a typical board using the 74HC151?
The median is 99.5 × 62.9 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74HC151?
By GitHub stars, IN16 optoToESP8266 by LudovicLemarinel, with 3 stars.
Can I simulate one of these boards using the 74HC151 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.