9 open source boards using the 74HC590A

Real designs built with the 74HC590A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the 74HC590A

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74HC590A connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 50 µF).
  • The RCO pin is left unconnected on 4 of 6 designs (a signal on 2).
  • The CE pin is tied to GND on 4 of 6 designs (a signal on 2).
GNDpin 8Connected to: GND 100%
RCOpin 9Connected to: Not connected 67% · a signal 33%
MRCpin 10Connected to: Signal 83% · 5V 17%
  • Capacitor to GND on 33% · 4.7 nF (1)
CEpin 12Connected to: GND 67% · a signal 33%
VCCpin 16Connected to: 5V 100%
  • Decoupling capacitor on 83% · 100 nF (3), 50 µF (1)

11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PLC-14500 by nicolacimmino, 6502fast3serial22v10 by gfoot, No mcu distance meter by AlexIII and A0 by smaldragon.

The 74HC590A in open source designs

The gallery holds 9 open source boards using the 74HC590A from 6 GitHub repositories; a typical one measures about 190 × 87.3 mm and carries around 118 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is PLC-14500 by nicolacimmino.

Microcontrollers on boards using the 74HC590A

What boards using the 74HC590A are built for

74HC590A: common questions

Where can I find a 74HC590A reference design?

Each of the 9 boards on this page is a real design using the 74HC590A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74HC590A VCC pin?

The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 50 µF). Counted from the KiCad layouts of 6 open source designs using the 74HC590A.

How is the 74HC590A RCO pin connected?

The RCO pin is left unconnected on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74HC590A.

How is the 74HC590A CE pin connected?

The CE pin is tied to GND on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74HC590A.

What parts are used alongside the 74HC590A?

The 74HC14, 62256, 74HC00, 74HC166 and 74HC4520 appear in the most repositories here.

Which microcontrollers do boards using the 74HC590A use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 74HC590A?

The median is 190 × 87.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the 74HC590A?

By GitHub stars, PLC-14500 by nicolacimmino, with 69 stars.

Can I simulate one of these boards using the 74HC590A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part