7 open source boards using the 74HCT11
Real designs built with the 74HCT11, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
UMMF
nils-eilers
105 × 100 mm63 parts2LNo license10TTL 6510 Computer
StefansAI
368.3 × 215.9 mm330 parts2LNo license1TMS9918A YM2149
daveho
150 × 90 mm44 parts2LNo license19TTL 6510 Computer fab
StefansAI
368.3 × 215.9 mm330 parts2LNo license1InterruptAndKeyboard
daveho
150 × 90 mm37 partsNo license19ALU
AJain9199
100 × 100 mm70 parts4LNo license1Memory
89Mods
209.6 × 108.5 mm58 parts4LMIT2
How designs wire the 74HCT11
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HCT11 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 7 | Connected to: GND 80% · a signal 20% | — |
| VCCpin 14 | Connected to: VCC 80% · a signal 20% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include InterruptAndKeyboard by daveho, UMMF by nils-eilers, Memory by 89Mods and ALU by AJain9199.
The 74HCT11 in open source designs
The gallery holds 7 open source boards using the 74HCT11 from 5 GitHub repositories; a typical one measures about 150 × 100 mm and carries around 63 components.
67% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is TMS9918A YM2149 by daveho.
Parts used alongside the 74HCT11
What boards using the 74HCT11 are built for
74HCT11: common questions
Where can I find a 74HCT11 reference design?
Each of the 7 boards on this page is a real design using the 74HCT11. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT11 VCC pin?
The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 5 open source designs using the 74HCT11.
What parts are used alongside the 74HCT11?
The 74HCT00, 74HCT04, 74HCT32, 74HCT08 and 74HCT138 appear in the most repositories here.
How big is a typical board using the 74HCT11?
The median is 150 × 100 mm, and 67% are two-layer designs.
What is the most popular open source board using the 74HCT11?
By GitHub stars, TMS9918A YM2149 by daveho, with 19 stars.
Can I simulate one of these boards using the 74HCT11 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.