12 open source boards using the 74LS181
Real designs built with the 74LS181, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ALU1 - 副本
Left-Hand
99.7 × 99.7 mm73 parts2LNo license19Showcase
draklowell
100 × 99.5 mm47 parts2LGPL-3.03TTL 6510 Computer
StefansAI
368.3 × 215.9 mm330 parts2LNo license1AVR/Arduino
8bit
Haxintosh
214.7 × 238.3 mm468 parts2LCERN-OHL-P-2.00TTL 6510 Computer fab
StefansAI
368.3 × 215.9 mm330 parts2LNo license1Register board
edatki
124 × 83 mm21 parts2LNo license0Alu hub
draklowell
100 × 99.5 mm23 parts2LGPL-3.03ALU
AJain9199
100 × 100 mm70 parts4LNo license1ALU
89Mods
209.6 × 108 mm82 parts4LMIT2ALU V1
georgesleen
75.2 × 40.2 mm12 parts4LNo license0Alu
TomNisbet
102 × 96 mm40 parts2LMIT18ALU Main
Shmerlard
100 × 100 mm14 parts2LNo license18
How designs wire the 74LS181
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74LS181 connects to, and the resistors, capacitors and other passives placed on it.
- The X pin is left unconnected on 9 of 10 designs.
- The Y pin is left unconnected on 9 of 10 designs.
- The A=B pin is left unconnected on 7 of 10 designs (a signal on 3).
- The VCC pin has a decoupling capacitor on 4 of 10 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| B0pin 1 | Connected to: A connector 50%, 74LS245 20% |
|
| GNDpin 12 | Connected to: GND 90% | — |
| A=Bpin 14 | Connected to: Not connected 70% · a signal 30% | — |
| Xpin 15 | Connected to: Not connected 90% | — |
| Ypin 17 | Connected to: Not connected 90% | — |
| B3pin 18 | Connected to: A connector 50%, 74LS245 20% |
|
| B2pin 20 | Connected to: A connector 50%, 74LS245 20% |
|
| B1pin 22 | Connected to: A connector 50%, 74LS245 20% |
|
| VCCpin 24 | Connected to: 5V 90% |
|
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ALU1 - 副本 by Left-Hand, ALU Main by Shmerlard, Alu by TomNisbet and Alu hub by draklowell.
The 74LS181 in open source designs
The gallery holds 12 open source boards using the 74LS181 from 10 GitHub repositories; a typical one measures about 101 × 99.8 mm and carries around 59 components.
75% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.
The most starred is ALU1 - 副本 by Left-Hand.
Parts used alongside the 74LS181
Microcontrollers on boards using the 74LS181
What boards using the 74LS181 are built for
74LS181: common questions
Where can I find a 74LS181 reference design?
Each of the 12 boards on this page is a real design using the 74LS181. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS181 X pin connected?
The X pin is left unconnected on 9 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the 74LS181.
How is the 74LS181 Y pin connected?
The Y pin is left unconnected on 9 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the 74LS181.
How is the 74LS181 A=B pin connected?
The A=B pin is left unconnected on 7 of 10 designs (a signal on 3). Counted from the KiCad layouts of 10 open source designs using the 74LS181.
What parts are used alongside the 74LS181?
The 74LS04, 74LS245, 74HCT02, 74HCT04 and 74HCT08 appear in the most repositories here.
Which microcontrollers do boards using the 74LS181 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74LS181?
The median is 101 × 99.8 mm, and 75% are two-layer designs.
What is the most popular open source board using the 74LS181?
By GitHub stars, ALU1 - 副本 by Left-Hand, with 19 stars.
Can I simulate one of these boards using the 74LS181 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.