5 open source boards using the 74HCT238
Real designs built with the 74HCT238, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT3142FISC
DoctorWkt
214.6 × 123.2 mm73 parts2LGPL-3.010Civil25
raleighslack
137.2 × 137.2 mm40 parts2LApache-2.06AVR/Arduino
Flipdot Controller
Qeteshpony
100 × 100 mm51 parts2LBSD-2-Clause2AVR/Arduino
8bit computer
saktheeswaranswan
297.2 × 180.3 mm327 parts2LMIT0
How designs wire the 74HCT238
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the 74HCT238 connects to, and the resistors, capacitors and other passives placed on it.
- The E1 pin is tied to GND on 3 of 5 designs (a signal on 2).
- The E2 pin is tied to GND on 3 of 5 designs (a signal on 2).
- The E3 pin is tied to VCC on 3 of 5 designs (a signal on 2).
- The Y0 pin is left unconnected on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| A0pin 1 | Connected to: AM29F040 40% |
|
| A1pin 2 | Connected to: AM29F040 40% |
|
| A2pin 3 | Connected to: AM29F040 40% |
|
| E1pin 4 | Connected to: GND 60% · a signal 40% | — |
| E2pin 5 | Connected to: GND 60% · a signal 40% | — |
| E3pin 6 | Connected to: VCC 60% · a signal 40% | — |
| GNDpin 8 | Connected to: GND 80% · a signal 20% | — |
| Y0pin 15 | Connected to: Not connected 60% · a signal 40% | — |
| VCCpin 16 | Connected to: VCC 80% · a signal 20% | — |
7 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, 2FISC by DoctorWkt, Civil25 by raleighslack and Flipdot Controller by Qeteshpony.
The 74HCT238 in open source designs
The gallery holds 5 open source boards using the 74HCT238 from 5 GitHub repositories; a typical one measures about 214.6 × 137.2 mm and carries around 73 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is 8bit computer by vascofazza.
Parts used alongside the 74HCT238
Microcontrollers on boards using the 74HCT238
What boards using the 74HCT238 are built for
74HCT238: common questions
Where can I find a 74HCT238 reference design?
Each of the 5 boards on this page is a real design using the 74HCT238. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74HCT238 E1 pin connected?
The E1 pin is tied to GND on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 74HCT238.
How is the 74HCT238 E2 pin connected?
The E2 pin is tied to GND on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 74HCT238.
How is the 74HCT238 E3 pin connected?
The E3 pin is tied to VCC on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the 74HCT238.
What parts are used alongside the 74HCT238?
The 74HCT139, 74HCT161, 28C64, 74HCT00 and 74HCT02 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT238 use?
Most are built on AVR/Arduino (3).
How big is a typical board using the 74HCT238?
The median is 214.6 × 137.2 mm, and 100% are two-layer designs.
What is the most popular open source board using the 74HCT238?
By GitHub stars, 8bit computer by vascofazza, with 314 stars.
Can I simulate one of these boards using the 74HCT238 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.