14 open source boards using the 74HCT161
Real designs built with the 74HCT161, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
8bit computer
vascofazza
297.2 × 180.3 mm327 parts2LMIT314NQSAP-PCB Program Counter and Stack Pointer
TomNisbet
102 × 96 mm65 parts2LMIT182FISC
DoctorWkt
214.6 × 123.2 mm73 parts2LGPL-3.010FISC
DoctorWkt
231.3 × 96.5 mm59 parts2LGPL-3.07TTL 6510 Computer
StefansAI
368.3 × 215.9 mm330 parts2LNo license1AVR/Arduino
8bit computer
saktheeswaranswan
297.2 × 180.3 mm327 parts2LMIT0P8x peripheral card
ksr
280 × 140 mm101 parts4LNo license08-bit computer Input Module
xrayer2000
106 parts2LCC-BY-NC-4.030TTL 6510 Computer fab
StefansAI
368.3 × 215.9 mm330 parts2LNo license1Cpu8085
nandgate
122.9 × 99.6 mm39 parts2LMIT1CpuZ80
nandgate
122.9 × 99.6 mm33 parts2LMIT1P8x io card
ksr
280 × 140 mm62 parts4LNo license0P8x control card
ksr
280 × 140 mm55 parts4LNo license0NQSAP-PCB Instruction Register and Ring Counter
TomNisbet
102 × 96 mm52 parts2LMIT18
How designs wire the 74HCT161
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74HCT161 connects to, and the resistors, capacitors and other passives placed on it.
- The TC pin is left unconnected on 5 of 8 designs (a signal on 3).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CEPpin 7 | Connected to: AM29F040 25%, 74HCT139 25%, 74HCT151 25% · VCC 38% |
|
| GNDpin 8 | Connected to: GND 63% · a signal 38% |
|
| TCpin 15 | Connected to: Not connected 63% · a signal 38% | — |
| VCCpin 16 | Connected to: VCC 63% · a signal 38% |
|
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 8bit computer by vascofazza, NQSAP-PCB Instruction Register and Ring Counter by TomNisbet, 2FISC by DoctorWkt and FISC by DoctorWkt.
The 74HCT161 in open source designs
The gallery holds 14 open source boards using the 74HCT161 from 9 GitHub repositories; a typical one measures about 280 × 140 mm and carries around 69 components.
79% are two-layer designs, the rest use four layers or more, and 57% carry an open source license.
The most starred is 8bit computer by vascofazza.
Parts used alongside the 74HCT161
Microcontrollers on boards using the 74HCT161
What boards using the 74HCT161 are built for
74HCT161: common questions
Where can I find a 74HCT161 reference design?
Each of the 14 boards on this page is a real design using the 74HCT161. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74HCT161 TC pin connected?
The TC pin is left unconnected on 5 of 8 designs (a signal on 3). Counted from the KiCad layouts of 8 open source designs using the 74HCT161.
What parts are used alongside the 74HCT161?
The 74HCT00, 74HCT138, 74HCT245, 74HCT04 and 74HCT08 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT161 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the 74HCT161?
The median is 280 × 140 mm, and 79% are two-layer designs.
What is the most popular open source board using the 74HCT161?
By GitHub stars, 8bit computer by vascofazza, with 314 stars.
Can I simulate one of these boards using the 74HCT161 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.