9 open source boards using the 74HCT373
Real designs built with the 74HCT373, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Amiga 2000 EATX
jasonsbeer
304.8 × 330.2 mm599 parts4LGPL-3.0199RC6502 General Video Adapter
tebl
99.1 × 99.7 mm80 parts2LGPL-3.0192MSX Goauld Rev4
jabadiagm
33.3 × 54.6 mm17 parts4LGPL-3.0986309-Unleashed
FredericSegard
252.7 × 106.7 mm95 parts2LNo license3My pcxt
ppsilv
258.4 × 104.1 mm85 parts2LNo license0RP2040/RP2350
Picolino-CPC
salvogendut
150 × 120 mm81 parts2LGPL-3.00MCS-96 MinimalBoard
fenr1r
113.8 × 96.5 mm60 parts2LNo license0MSX-IDE 2021
jabadiagm
55.3 × 64.8 mm15 parts2LGPL-3.098PIC
Tralala8088homebrew
ppsilv
258.4 × 104.1 mm85 parts2LNo license0
How designs wire the 74HCT373
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the 74HCT373 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: 5V 86% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Amiga 2000 EATX by jasonsbeer, RC6502 General Video Adapter by tebl, MSX Goauld Rev4 by jabadiagm and 6309-Unleashed by FredericSegard.
The 74HCT373 in open source designs
The gallery holds 9 open source boards using the 74HCT373 from 7 GitHub repositories; a typical one measures about 150 × 104.1 mm and carries around 81 components.
78% are two-layer designs, the rest use four layers or more, and 56% carry an open source license.
The most starred is Amiga 2000 EATX by jasonsbeer.
Parts used alongside the 74HCT373
Microcontrollers on boards using the 74HCT373
What boards using the 74HCT373 are built for
74HCT373: common questions
Where can I find a 74HCT373 reference design?
Each of the 9 boards on this page is a real design using the 74HCT373. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HCT373 VCC pin?
The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the 74HCT373.
What parts are used alongside the 74HCT373?
The 74HCT00, 74HCT245, 74HCT32, 74HCT04 and 74HCT08 appear in the most repositories here.
Which microcontrollers do boards using the 74HCT373 use?
Most are built on PIC (1) and RP2040/RP2350 (1).
How big is a typical board using the 74HCT373?
The median is 150 × 104.1 mm, and 78% are two-layer designs.
What is the most popular open source board using the 74HCT373?
By GitHub stars, Amiga 2000 EATX by jasonsbeer, with 199 stars.
Can I simulate one of these boards using the 74HCT373 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.