11 open source boards using the 74LS03
Real designs built with the 74LS03, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
TI99 22
danwerner21
350 × 224.3 mm242 parts2LNo license50MAXI030
aslak3
239.4 × 165.7 mm197 parts4LGPL-2.038QL QsoundQprint clone
alvaroalea
99.1 × 99.1 mm22 parts2LCERN-OHL-S-2.011ESP32
Msx joyblue v2
herraa1
62 × 72 mm62 parts2LGPL-3.05ESP32
TI99 22
danwerner21
244 × 244 mm257 parts4LNo license4Microcomputer-Design
DukkyCode
156.2 × 100.3 mm69 parts2LNo license0Spreadout
aslak3
239.4 × 165.7 mm190 parts4LGPL-2.038ADV-16 CPU
abzman
228.1 × 172.7 mm111 parts2LUnlicense4Fdc01
felge1966
170.2 × 96.5 mm40 parts2LAGPL-3.00Cpu01
felge1966
170.2 × 95.3 mm33 parts2LAGPL-3.00Northstar PIO
abzman
76.3 × 147.3 mm39 parts2LUnlicense4
How designs wire the 74LS03
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74LS03 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 3 has a pull-up to 5V on 5 of 8 designs, most often 4.7 kΩ (then 2.2 kΩ).
- Pin 6 has a pull-up to 5V on 5 of 8 designs, most often 2.2 kΩ (then 1 kΩ).
- Pin 11 has a pull-up to 5V on 4 of 8 designs, most often 1 kΩ (then 470 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: 74LS04 25%, a connector 25% · not connected 38% |
|
| Pin 3 | Connected to: 74LS74 25%, SN76489 25%, a connector 25% · not connected 25% |
|
| Pin 6 | Connected to: A connector 38%, 74LS138 25% · not connected 25% |
|
| GNDpin 7 | Connected to: GND 100% | — |
| Pin 11 | Connected to: 74LS04 38% · not connected 38% |
|
| VCCpin 14 | Connected to: 5V 88% |
|
8 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TI99 22 by danwerner21, MAXI030 by aslak3, QL QsoundQprint clone by alvaroalea and Msx joyblue v2 by herraa1.
The 74LS03 in open source designs
The gallery holds 11 open source boards using the 74LS03 from 8 GitHub repositories; a typical one measures about 170.2 × 147.3 mm and carries around 69 components.
73% are two-layer designs, the rest use four layers or more, and 73% carry an open source license.
The most starred is TI99 22 by danwerner21.
Parts used alongside the 74LS03
Microcontrollers on boards using the 74LS03
What boards using the 74LS03 are built for
74LS03: common questions
Where can I find a 74LS03 reference design?
Each of the 11 boards on this page is a real design using the 74LS03. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the 74LS03 pin 3?
Pin 3 has a pull-up to 5V on 5 of 8 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 8 open source designs using the 74LS03.
What pull-up resistor is used on the 74LS03 pin 6?
Pin 6 has a pull-up to 5V on 5 of 8 designs, most often 2.2 kΩ (then 1 kΩ). Counted from the KiCad layouts of 8 open source designs using the 74LS03.
What pull-up resistor is used on the 74LS03 pin 11?
Pin 11 has a pull-up to 5V on 4 of 8 designs, most often 1 kΩ (then 470 Ω). Counted from the KiCad layouts of 8 open source designs using the 74LS03.
What parts are used alongside the 74LS03?
The 74LS00, 74LS04, 74LS138, 74LS74 and 74LS08 appear in the most repositories here.
Which microcontrollers do boards using the 74LS03 use?
Most are built on ESP32 (2).
How big is a typical board using the 74LS03?
The median is 170.2 × 147.3 mm, and 73% are two-layer designs.
What is the most popular open source board using the 74LS03?
By GitHub stars, TI99 22 by danwerner21, with 50 stars.
Can I simulate one of these boards using the 74LS03 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.