11 open source boards using the 74LS241
Real designs built with the 74LS241, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
6-DOF-Robotics-Arm-Dynamixel
Ramahabir
134.5 × 70 mm13 parts2LMIT19Junior interface
laurent-fr
217.2 × 113 mm116 parts2LCC-BY-NC-4.014Mainboard
btb
414.3 × 266.7 mm155 parts2LNo license0SBC80386EX
danwerner21
160 × 100 mm96 parts4LNo license0ESP32
6-DOF-Robotics-Arm-Dynamixel
Fork-Hard-Robotics
134.5 × 70 mm13 parts2LMIT0Junior computer
laurent-fr
217.2 × 113 mm80 parts2LCC-BY-NC-4.014Z80CTCDART2
lynchaj
100 × 100 mm73 parts2LNo license31Junior computer - Copie
laurent-fr
204.5 × 104.1 mm77 parts2LCC-BY-NC-4.014Display
JAndersM
112.4 × 78.7 mm26 parts2LGPL-3.00Junior universal memory
laurent-fr
160 × 100 mm38 parts2LCC-BY-NC-4.014ACEDIAGBOARD
flypie
114.3 × 95.9 mm44 parts2LGPL-3.013
How designs wire the 74LS241
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 74LS241 connects to, and the resistors, capacitors and other passives placed on it.
- The PIN_10 pin is tied to GND on 7 of 8 designs.
- The PIN_20 pin is tied to VCC on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PIN_10pin 10 | Connected to: GND 88% | — |
| PIN_20pin 20 | Connected to: VCC 100% | — |
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Z80CTCDART2 by lynchaj, 6-DOF-Robotics-Arm-Dynamixel by Ramahabir, Junior computer by laurent-fr and ACEDIAGBOARD by flypie.
The 74LS241 in open source designs
The gallery holds 11 open source boards using the 74LS241 from 8 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 73 components.
91% are two-layer designs, the rest use four layers or more, and 36% carry an open source license.
The most starred is Z80CTCDART2 by lynchaj.
Microcontrollers on boards using the 74LS241
What boards using the 74LS241 are built for
74LS241: common questions
Where can I find a 74LS241 reference design?
Each of the 11 boards on this page is a real design using the 74LS241. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 74LS241 PIN_10 pin connected?
The PIN_10 pin is tied to GND on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 74LS241.
How is the 74LS241 PIN_20 pin connected?
The PIN_20 pin is tied to VCC on 7 of 7 designs. Counted from the KiCad layouts of 8 open source designs using the 74LS241.
What parts are used alongside the 74LS241?
The 2716, 74LS00, 74LS245, 74LS393 and 74LS74 appear in the most repositories here.
Which microcontrollers do boards using the 74LS241 use?
Most are built on ESP32 (2).
How big is a typical board using the 74LS241?
The median is 160 × 100 mm, and 91% are two-layer designs.
What is the most popular open source board using the 74LS241?
By GitHub stars, Z80CTCDART2 by lynchaj, with 31 stars.
Can I simulate one of these boards using the 74LS241 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.