10 open source boards using the 2716
Real designs built with the 2716, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Fennec6800
ChartreuseK
218 × 131.9 mm113 parts2LBSD-3-Clause20Junior interface
laurent-fr
217.2 × 113 mm116 parts2LCC-BY-NC-4.014Atari-1090XL-80CVC
reifsnyderb
228.6 × 139.7 mm78 parts2LGPL-2.03Pedisk2
mnaberez
143.3 × 77.5 mm43 parts2LNo license3Peoples permacomputer
genossen
208.3 × 146.1 mm121 parts2LCustom license2Mainboard
btb
414.3 × 266.7 mm155 parts2LNo license0- schematic only · 59 parts
Jbecrtctrl
ngdrascal
59 partsMIT0 Junior computer
laurent-fr
217.2 × 113 mm80 parts2LCC-BY-NC-4.014Junior computer - Copie
laurent-fr
204.5 × 104.1 mm77 parts2LCC-BY-NC-4.014Junior universal memory
laurent-fr
160 × 100 mm38 parts2LCC-BY-NC-4.014
How designs wire the 2716
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 2716 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 12 | Connected to: GND 83% · a signal 17% | — |
| VPPpin 21 | Connected to: VCC 60% · a signal 40% | — |
| VCCpin 24 | Connected to: VCC 100% |
|
21 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Fennec6800 by ChartreuseK, Junior computer by laurent-fr, Pedisk2 by mnaberez and Atari-1090XL-80CVC by reifsnyderb.
The 2716 in open source designs
The gallery holds 10 open source boards using the 2716 from 7 GitHub repositories; a typical one measures about 217.2 × 113 mm and carries around 79 components.
100% are two-layer designs, the rest use four layers or more, and 30% carry an open source license.
The most starred is Fennec6800 by ChartreuseK.
Parts used alongside the 2716
What boards using the 2716 are built for
2716: common questions
Where can I find a 2716 reference design?
Each of the 10 boards on this page is a real design using the 2716. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 2716 VCC pin?
The VCC pin has a decoupling capacitor on 2 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the 2716.
What parts are used alongside the 2716?
The 74LS74, 6116, 74LS00, 74LS04 and 74LS138 appear in the most repositories here.
How big is a typical board using the 2716?
The median is 217.2 × 113 mm, and 100% are two-layer designs.
What is the most popular open source board using the 2716?
By GitHub stars, Fennec6800 by ChartreuseK, with 20 stars.
Can I simulate one of these boards using the 2716 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.