10 open source boards using the 74LVC245A
Real designs built with the 74LVC245A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
64MB-SIMM
herzmx
108 × 25.3 mm34 parts4LCC-BY-NC-4.012RP2040/RP2350
SVI-3x8 PicoExpander
fitch
150 × 38 mm14 parts2LMIT12Tia fpga
lrrosa
61.6 × 34.5 mm24 parts2LCERN-OHL-S-2.02AVR/Arduino
8086-computer
EldadHellerman
94 × 90 mm146 parts2LNo license0Olimex iCE40HX-expansion
dartcom
53.5 × 71.9 mm132 parts2LNo license0SA4000
cm68
170 × 110 mm59 parts2LCERN-OHL-P-2.00- schematic only · 80 parts
Mini xt
vaelen
80 partsNo license0 - schematic only · 25 partsRP2040/RP2350
Usbscsi
cm68
25 partsNo license0 128MB-SIMM
herzmx
108 × 25.3 mm29 parts4LCC-BY-NC-4.012MSX IDC Adapter
costarc
103 × 66 mm25 parts2LMIT7
How designs wire the 74LVC245A
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LVC245A connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 10 | Connected to: GND 100% | — |
| VCCpin 20 | Connected to: 3.3V 100% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SVI-3x8 PicoExpander by fitch, 128MB-SIMM by herzmx, MSX IDC Adapter by costarc and Tia fpga by lrrosa.
The 74LVC245A in open source designs
The gallery holds 10 open source boards using the 74LVC245A from 9 GitHub repositories; a typical one measures about 105.5 × 52 mm and carries around 32 components.
75% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is 64MB-SIMM by herzmx.
Parts used alongside the 74LVC245A
Microcontrollers on boards using the 74LVC245A
What boards using the 74LVC245A are built for
74LVC245A: common questions
Where can I find a 74LVC245A reference design?
Each of the 10 boards on this page is a real design using the 74LVC245A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74LVC245A VCC pin?
The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 6 open source designs using the 74LVC245A.
Which microcontrollers do boards using the 74LVC245A use?
Most are built on RP2040/RP2350 (2) and AVR/Arduino (1).
How big is a typical board using the 74LVC245A?
The median is 105.5 × 52 mm, and 75% are two-layer designs.
What is the most popular open source board using the 74LVC245A?
By GitHub stars, 64MB-SIMM by herzmx, with 12 stars.
Can I simulate one of these boards using the 74LVC245A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.