6 open source boards using the SN74LVC1G175DCKR

Real designs built with the SN74LVC1G175DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the SN74LVC1G175DCKR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SN74LVC1G175DCKR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 2.2 µF).
  • The C pin has a series resistor on 4 of 6 designs, most often 6.9 kΩ.
  • The R pin is tied to VDD on 4 of 6 designs (a signal on 2).
  • The Q pin has a crystal on 3 of 6 designs.
Cpin 1Connected to: SN74LVC1G175DCKR 33%
  • Series resistor on 67% · 6.9 kΩ (1)
GNDpin 2Connected to: GND 100%
Qpin 4Connected to: Signal 100%
  • Crystal on 50%
VCCpin 5Connected to: VDD 100%
  • Decoupling capacitor on 83% · 100 nF (2), 2.2 µF (1)
  • Crystal on 33%
Rpin 6Connected to: VDD 67% · a signal 33%
  • Crystal on 33%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-aurora by freeDSP, Base board by GeniePod, TMP117-ADXL345 section 5cm by BerkeleyLab and FreeDSP-aurora by mischuja.

The SN74LVC1G175DCKR in open source designs

The gallery holds 6 open source boards using the SN74LVC1G175DCKR from 6 GitHub repositories; a typical one measures about 110 × 86.1 mm and carries around 194 components.

67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is FreeDSP-aurora by freeDSP.

Microcontrollers on boards using the SN74LVC1G175DCKR

What boards using the SN74LVC1G175DCKR are built for

SN74LVC1G175DCKR: common questions

Where can I find a SN74LVC1G175DCKR reference design?

Each of the 6 boards on this page is a real design using the SN74LVC1G175DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC1G175DCKR VCC pin?

The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G175DCKR.

What resistor goes on the SN74LVC1G175DCKR C pin?

The C pin has a series resistor on 4 of 6 designs, most often 6.9 kΩ. Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G175DCKR.

How is the SN74LVC1G175DCKR R pin connected?

The R pin is tied to VDD on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the SN74LVC1G175DCKR.

What parts are used alongside the SN74LVC1G175DCKR?

The 25AA1024T-I/SM, ADAU1452WBCPZ, ADM811TARTZ-REEL, CS2100CP-CZZ and ESP32-WROOM-32U appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1G175DCKR use?

Most are built on ESP32 (3).

How big is a typical board using the SN74LVC1G175DCKR?

The median is 110 × 86.1 mm, and 67% are two-layer designs.

What is the most popular open source board using the SN74LVC1G175DCKR?

By GitHub stars, FreeDSP-aurora by freeDSP, with 222 stars.

Can I simulate one of these boards using the SN74LVC1G175DCKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part