4 open source boards using the AT7456

Real designs built with the AT7456, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The AT7456 in open source designs

The gallery holds 4 open source boards using the AT7456 from 4 GitHub repositories; a typical one measures about 34 × 34 mm and carries around 211 components.

75% use four copper layers or more, and 50% carry an open source license.

The most starred is OpenDrone HW AIO FC F405 by phonght32.

Microcontrollers on boards using the AT7456

What boards using the AT7456 are built for

AT7456: common questions

Where can I find a AT7456 reference design?

Each of the 4 boards on this page is a real design using the AT7456. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the AT7456?

The BMP280, OUTLINE, RT9013-33GB, STM32F405RGTx and TPS54560BDDA appear in the most repositories here.

Which microcontrollers do boards using the AT7456 use?

Most are built on STM32 (3) and AVR/Arduino (1).

How big is a typical board using the AT7456?

The median is 34 × 34 mm, and 25% are two-layer designs.

What is the most popular open source board using the AT7456?

By GitHub stars, OpenDrone HW AIO FC F405 by phonght32, with 50 stars.

Can I simulate one of these boards using the AT7456 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part