3 open source boards using the OUTLINE
Real designs built with the OUTLINE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32OpenDrone HW AIO FC F405
phonght32
34 × 34 mm211 parts8LMIT50
STM32OpenSTM32F4 LQFP64
54 × 68 mm77 parts2LMIT7
STM32Qnot1
SushEdge
34 × 34 mm211 parts8LNo license1
The OUTLINE in open source designs
The gallery holds 3 open source boards using the OUTLINE from 3 GitHub repositories; a typical one measures about 34 × 34 mm and carries around 211 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is OpenDrone HW AIO FC F405 by phonght32.
Parts used alongside the OUTLINE
Microcontrollers on boards using the OUTLINE
What boards using the OUTLINE are built for
OUTLINE: common questions
Where can I find a OUTLINE reference design?
Each of the 3 boards on this page is a real design using the OUTLINE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the OUTLINE?
The STM32F405RGTx, AT7456, BMP280, RT9013-33GB and TPS54560BDDA appear in the most repositories here.
Which microcontrollers do boards using the OUTLINE use?
Most are built on STM32 (3).
How big is a typical board using the OUTLINE?
The median is 34 × 34 mm, and 33% are two-layer designs.
What is the most popular open source board using the OUTLINE?
By GitHub stars, OpenDrone HW AIO FC F405 by phonght32, with 50 stars.
Can I simulate one of these boards using the OUTLINE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.