5 open source boards using the AY-3-8912

Real designs built with the AY-3-8912, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the AY-3-8912

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the AY-3-8912 connects to, and the resistors, capacitors and other passives placed on it.

  • The C pin has a series resistor on 5 of 5 designs, most often 15 kΩ (then 1.6 kΩ).
  • The A pin has a series resistor on 5 of 5 designs, most often 10 kΩ (then 22 kΩ).
  • The B pin has a series resistor on 5 of 5 designs, most often 10 kΩ (then 1 kΩ).
  • The TEST_1 pin is left unconnected on 5 of 5 designs.
Cpin 1Connected to: AY-3-8910 40%
  • Series resistor on 100% · 15 kΩ (2), 1.6 kΩ (2), 10 kΩ (2)
  • Resistor to GND on 60% · 470 Ω (1), 1 kΩ (1), 10 kΩ (1)
TEST_1pin 2Connected to: Not connected 100%
VCCpin 3Connected to: 5V 80% · a signal 20%
Apin 4Connected to: AY-3-8910 40%
  • Series resistor on 100% · 10 kΩ (2), 22 kΩ (2), 5.6 kΩ (2)
  • Resistor to GND on 60% · 470 Ω (1), 1 kΩ (1), 10 kΩ (1)
Bpin 5Connected to: AY-3-8910 40%
  • Series resistor on 100% · 10 kΩ (3), 1 kΩ (1), 2.4 kΩ (1)
  • Resistor to GND on 60% · 470 Ω (1), 1 kΩ (1), 10 kΩ (1)
GNDpin 6Connected to: GND 100%
A8pin 17Connected to: VCC 60% · not connected 40%
BC2pin 19Connected to: 5V 100%

20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Papaya by gasman, Melodik2 by z00m128, TIMAYSound by Board-Folk and Oric by Board-Folk.

The AY-3-8912 in open source designs

The gallery holds 5 open source boards using the AY-3-8912 from 5 GitHub repositories; a typical one measures about 78.1 × 85.1 mm and carries around 41 components.

80% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Papaya by gasman.

Parts used alongside the AY-3-8912

What boards using the AY-3-8912 are built for

AY-3-8912: common questions

Where can I find a AY-3-8912 reference design?

Each of the 5 boards on this page is a real design using the AY-3-8912. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the AY-3-8912 C pin?

The C pin has a series resistor on 5 of 5 designs, most often 15 kΩ (then 1.6 kΩ). Counted from the KiCad layouts of 5 open source designs using the AY-3-8912.

What resistor goes on the AY-3-8912 A pin?

The A pin has a series resistor on 5 of 5 designs, most often 10 kΩ (then 22 kΩ). Counted from the KiCad layouts of 5 open source designs using the AY-3-8912.

What resistor goes on the AY-3-8912 B pin?

The B pin has a series resistor on 5 of 5 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 5 open source designs using the AY-3-8912.

What parts are used alongside the AY-3-8912?

The LM386, 74LS00 and AY-3-8910 appear in the most repositories here.

How big is a typical board using the AY-3-8912?

The median is 78.1 × 85.1 mm, and 80% are two-layer designs.

What is the most popular open source board using the AY-3-8912?

By GitHub stars, Papaya by gasman, with 16 stars.

Can I simulate one of these boards using the AY-3-8912 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part