14 open source boards using the BQ24040DSQR

Real designs built with the BQ24040DSQR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

14 boardsClear filters|Most starred

How designs wire the BQ24040DSQR

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the BQ24040DSQR connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin has a capacitor to GND on 9 of 9 designs, most often 1 µF (then 10 µF).
  • The ISET pin has a resistor to GND on 8 of 10 designs, most often 2 kΩ (then 5 kΩ).
  • The NC_6 pin is left unconnected on 9 of 9 designs.
  • The EXP pin is tied to GND on 9 of 9 designs.
ISETpin 2Connected to: Signal 100%
  • Resistor to GND on 80% · 2 kΩ (2), 5 kΩ (1), 590 Ω (1)
VSSpin 3Connected to: GND 90%
PRETERM_4pin 4Connected to: Signal 50% · not connected 40%
  • Resistor to GND on 50% · 2 kΩ (4), 10 kΩ (1)
PGpin 5Connected to: Not connected 60% · a signal 30%
NC_6pin 6Connected to: Not connected 100%
TSpin 9Connected to: A connector 22% · not connected 44%
  • Resistor to GND on 33% · 10 kΩ (3)
OUTpin 10Connected to: A connector 67% · VBAT 33%
  • Capacitor to GND on 100% · 1 µF (9), 10 µF (5), 100 nF (1)
  • Series resistor on 44% · 150 Ω (2), 1 kΩ (2), 1.5 kΩ (1)
EXPpin 11Connected to: GND 100%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Lego gameboy main by greigs, Main Board by omniframe-art, Ittypda by ingobeans and DevKitTell by NikolasKelava.

The BQ24040DSQR in open source designs

The gallery holds 14 open source boards using the BQ24040DSQR from 10 GitHub repositories; a typical one measures about 57.5 × 52.3 mm and carries around 77 components.

79% use four copper layers or more, and 29% carry an open source license.

The most starred is Lego gameboy main by greigs.

Parts used alongside the BQ24040DSQR

Microcontrollers on boards using the BQ24040DSQR

BQ24040DSQR: common questions

Where can I find a BQ24040DSQR reference design?

Each of the 14 boards on this page is a real design using the BQ24040DSQR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the BQ24040DSQR OUT pin connected?

The OUT pin has a capacitor to GND on 9 of 9 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the BQ24040DSQR.

What resistor goes on the BQ24040DSQR ISET pin?

The ISET pin has a resistor to GND on 8 of 10 designs, most often 2 kΩ (then 5 kΩ). Counted from the KiCad layouts of 10 open source designs using the BQ24040DSQR.

How is the BQ24040DSQR NC_6 pin connected?

The NC_6 pin is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 10 open source designs using the BQ24040DSQR.

Which microcontrollers do boards using the BQ24040DSQR use?

Most are built on ESP32 (5), Nordic nRF (5), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the BQ24040DSQR?

The median is 57.5 × 52.3 mm, and 21% are two-layer designs.

What is the most popular open source board using the BQ24040DSQR?

By GitHub stars, Lego gameboy main by greigs, with 14 stars.

Can I simulate one of these boards using the BQ24040DSQR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part