7 open source boards using the CIC
Real designs built with the CIC, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenTendo
Redherring32
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.0859SNSP-CPU-01
stonedDiscord
215.8 × 159 mm276 parts2LGPL-3.065AVR/Arduino
Sgb mbc5 1-4
MouseBiteLabs
110.7 × 69.8 mm88 parts4LCC-BY-SA-4.040Kicad snn cpu-01
qwertymodo
106 × 160.5 mm141 parts2LCERN-OHL-S-2.08OpenTendo
circuitly
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.00SNSP-CPU-1CHIP
stonedDiscord
155.5 × 161.9 mm222 parts2LGPL-3.065PIC
SNES Basic UV 1-1
MouseBiteLabs
110.2 × 77.8 mm40 parts2LCC-BY-SA-4.068
How designs wire the CIC
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the CIC connects to, and the resistors, capacitors and other passives placed on it.
- The RST pin has a capacitor to GND on 4 of 6 designs, most often 10 nF (then 47 pF).
- The LOCK/KEY pin is tied to VCC on 4 of 6 designs (GND on 2).
- The P22_17 pin is left unconnected on 3 of 3 designs.
- The VCC_18 pin has a decoupling capacitor on 2 of 3 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DATA_OUTpin 1 | Connected to: A connector 67%, the microcontroller 33% |
|
| DATA_INpin 2 | Connected to: A connector 67%, the microcontroller 33% |
|
| SEEDpin 3 | Connected to: Signal 67% · not connected 33% |
|
| LOCK/KEYpin 4 | Connected to: VCC 67% · GND 33% | — |
| NCpin 5, 14 | Connected to: Not connected 83% · GND 17% | — |
| RSTpin 7 | Connected to: A connector 67%, the microcontroller 33% |
|
| GNDpin 8, 11, 12, 13, 15 | Connected to: Not connected 47% · GND 37% · a signal 17% |
|
| P22_17pin 17 | Connected to: Not connected 100% | — |
| VCC_18pin 18 | Connected to: 5V 100% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenTendo by Redherring32, SNES Basic UV 1-1 by MouseBiteLabs, SNSP-CPU-01 by stonedDiscord and Sgb mbc5 1-4 by MouseBiteLabs.
The CIC in open source designs
The gallery holds 7 open source boards using the CIC from 6 GitHub repositories; a typical one measures about 155.5 × 118.7 mm and carries around 93 components.
86% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is OpenTendo by Redherring32.
Parts used alongside the CIC
Microcontrollers on boards using the CIC
What boards using the CIC are built for
CIC: common questions
Where can I find a CIC reference design?
Each of the 7 boards on this page is a real design using the CIC. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the CIC RST pin connected?
The RST pin has a capacitor to GND on 4 of 6 designs, most often 10 nF (then 47 pF). Counted from the KiCad layouts of 6 open source designs using the CIC.
How is the CIC LOCK/KEY pin connected?
The LOCK/KEY pin is tied to VCC on 4 of 6 designs (GND on 2). Counted from the KiCad layouts of 6 open source designs using the CIC.
How is the CIC P22_17 pin connected?
The P22_17 pin is left unconnected on 3 of 3 designs. Counted from the KiCad layouts of 6 open source designs using the CIC.
What parts are used alongside the CIC?
The 40H368 (CI), 40H368 (CII), 6116 (VRAM), 6116 (WRAM) and 74HC139 appear in the most repositories here.
Which microcontrollers do boards using the CIC use?
Most are built on AVR/Arduino (1) and PIC (1).
How big is a typical board using the CIC?
The median is 155.5 × 118.7 mm, and 86% are two-layer designs.
What is the most popular open source board using the CIC?
By GitHub stars, OpenTendo by Redherring32, with 859 stars.
Can I simulate one of these boards using the CIC before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.