5 open source boards using the DEA162400HT-8004B1
Real designs built with the DEA162400HT-8004B1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 414 partsNXP
Illacceptanything
illacceptanything
414 partsMIT2.0k 
NXPHackRf-Circuit-Board
GitByKaliMeNope
120 × 75 mm439 parts4LCERN-OHL-P-2.01
NXP${TITLE}
Josephrp
120 × 75 mm340 parts4LCustom license12
NXP${TITLE}
greearb
120 × 75 mm340 parts4LGPL-2.01
NXP${TITLE}
JensLiu
120 × 75 mm340 parts4LGPL-2.01
The DEA162400HT-8004B1 in open source designs
The gallery holds 5 open source boards using the DEA162400HT-8004B1 from 5 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 340 components.
100% use four copper layers or more, and 80% carry an open source license.
The most starred is Illacceptanything by illacceptanything.
Parts used alongside the DEA162400HT-8004B1
Microcontrollers on boards using the DEA162400HT-8004B1
What boards using the DEA162400HT-8004B1 are built for
DEA162400HT-8004B1: common questions
Where can I find a DEA162400HT-8004B1 reference design?
Each of the 5 boards on this page is a real design using the DEA162400HT-8004B1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the DEA162400HT-8004B1?
The LP0603A1880ANTR, LPC4320FBD144,551, MGA-81563-TR1G, RFFC5072TR7 and SKY13317-373LF appear in the most repositories here.
Which microcontrollers do boards using the DEA162400HT-8004B1 use?
Most are built on NXP (5).
How big is a typical board using the DEA162400HT-8004B1?
The median is 120 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the DEA162400HT-8004B1?
By GitHub stars, Illacceptanything by illacceptanything, with 1,961 stars.
Can I simulate one of these boards using the DEA162400HT-8004B1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.