5 open source boards using the VBUS54CV-HSF-G4-08
Real designs built with the VBUS54CV-HSF-G4-08, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
HackRf-Circuit-Board
GitByKaliMeNope
120 × 75 mm439 parts4LCERN-OHL-P-2.01NXP
${TITLE}
Josephrp
120 × 75 mm340 parts4LCustom license12NXP
${TITLE}
greearb
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
JensLiu
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
deepin-community
120 × 75 mm340 parts4LGPL-2.00
How designs wire the VBUS54CV-HSF-G4-08
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the VBUS54CV-HSF-G4-08 connects to, and the resistors, capacitors and other passives placed on it.
- The ESD1 pin has a series resistor on 5 of 5 designs, most often 0 Ω.
- The ESD2 pin has a series resistor on 5 of 5 designs, most often 0 Ω.
- Pin 0 is left unconnected on 5 of 5 designs.
- The VDD pin has a ferrite bead on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 0 | Connected to: Not connected 100% | — |
| ESD1pin 1 | Connected to: A connector 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| ESD2pin 3 | Connected to: A connector 100% |
|
| NCpin 4, 6 | Connected to: Not connected 100% | — |
| VDDpin 5 | Connected to: VBUS 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ${TITLE} by Josephrp, HackRf-Circuit-Board-KiCad by GitByKaliMeNope, ${TITLE} by greearb and ${TITLE} by JensLiu.
The VBUS54CV-HSF-G4-08 in open source designs
The gallery holds 5 open source boards using the VBUS54CV-HSF-G4-08 from 5 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 340 components.
100% use four copper layers or more, and 80% carry an open source license.
The most starred is ${TITLE} by Josephrp.
Parts used alongside the VBUS54CV-HSF-G4-08
Microcontrollers on boards using the VBUS54CV-HSF-G4-08
What boards using the VBUS54CV-HSF-G4-08 are built for
VBUS54CV-HSF-G4-08: common questions
Where can I find a VBUS54CV-HSF-G4-08 reference design?
Each of the 5 boards on this page is a real design using the VBUS54CV-HSF-G4-08. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the VBUS54CV-HSF-G4-08 ESD1 pin?
The ESD1 pin has a series resistor on 5 of 5 designs, most often 0 Ω. Counted from the KiCad layouts of 5 open source designs using the VBUS54CV-HSF-G4-08.
What resistor goes on the VBUS54CV-HSF-G4-08 ESD2 pin?
The ESD2 pin has a series resistor on 5 of 5 designs, most often 0 Ω. Counted from the KiCad layouts of 5 open source designs using the VBUS54CV-HSF-G4-08.
How is the VBUS54CV-HSF-G4-08 pin 0 connected?
Pin 0 is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the VBUS54CV-HSF-G4-08.
What parts are used alongside the VBUS54CV-HSF-G4-08?
The DEA162400HT-8004B1, LP0603A1880ANTR, LPC4320FBD144,551, MGA-81563-TR1G and RFFC5072TR7 appear in the most repositories here.
Which microcontrollers do boards using the VBUS54CV-HSF-G4-08 use?
Most are built on NXP (5).
How big is a typical board using the VBUS54CV-HSF-G4-08?
The median is 120 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the VBUS54CV-HSF-G4-08?
By GitHub stars, ${TITLE} by Josephrp, with 12 stars.
Can I simulate one of these boards using the VBUS54CV-HSF-G4-08 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.