7 open source boards using the LP0603A1880ANTR
Real designs built with the LP0603A1880ANTR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 414 partsNXP
Illacceptanything
illacceptanything
414 partsMIT2.0k NXP
Microwave-Transmitter
PeraZver
88.9 × 35.6 mm144 parts4LGPL-3.013NXP
HackRf-Circuit-Board
GitByKaliMeNope
120 × 75 mm439 parts4LCERN-OHL-P-2.01NXP
${TITLE}
Josephrp
120 × 75 mm340 parts4LCustom license12NXP
${TITLE}
greearb
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
JensLiu
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
deepin-community
120 × 75 mm340 parts4LGPL-2.00
How designs wire the LP0603A1880ANTR
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LP0603A1880ANTR connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin has a series capacitor on 6 of 6 designs, most often 100 nF (then 100 pF).
- The IN pin has a series capacitor on 5 of 6 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: Signal 100% |
|
| GNDpin 2, 3 | Connected to: GND 92% | — |
| INpin 4 | Connected to: Signal 83% · GND 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Microwave-Transmitter by PeraZver, ${TITLE} by Josephrp, HackRf-Circuit-Board-KiCad by GitByKaliMeNope and ${TITLE} by greearb.
The LP0603A1880ANTR in open source designs
The gallery holds 7 open source boards using the LP0603A1880ANTR from 7 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 340 components.
100% use four copper layers or more, and 86% carry an open source license.
The most starred is Illacceptanything by illacceptanything.
Parts used alongside the LP0603A1880ANTR
Microcontrollers on boards using the LP0603A1880ANTR
What boards using the LP0603A1880ANTR are built for
LP0603A1880ANTR: common questions
Where can I find a LP0603A1880ANTR reference design?
Each of the 7 boards on this page is a real design using the LP0603A1880ANTR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LP0603A1880ANTR OUT pin connected?
The OUT pin has a series capacitor on 6 of 6 designs, most often 100 nF (then 100 pF). Counted from the KiCad layouts of 6 open source designs using the LP0603A1880ANTR.
How is the LP0603A1880ANTR IN pin connected?
The IN pin has a series capacitor on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the LP0603A1880ANTR.
What parts are used alongside the LP0603A1880ANTR?
The DEA162400HT-8004B1, LPC4320FBD144,551, MGA-81563-TR1G, RFFC5072TR7 and SKY13317-373LF appear in the most repositories here.
Which microcontrollers do boards using the LP0603A1880ANTR use?
Most are built on NXP (7).
How big is a typical board using the LP0603A1880ANTR?
The median is 120 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the LP0603A1880ANTR?
By GitHub stars, Illacceptanything by illacceptanything, with 1,961 stars.
Can I simulate one of these boards using the LP0603A1880ANTR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.