7 open source boards using the RFFC5072TR7
Real designs built with the RFFC5072TR7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 414 partsNXP
Illacceptanything
illacceptanything
414 partsMIT2.0k FPGA
Hackrf pro
greatscottgadgets
120 × 75 mm503 parts6LCERN-OHL-P-2.063NXP
HackRf-Circuit-Board
GitByKaliMeNope
120 × 75 mm439 parts4LCERN-OHL-P-2.01NXP
${TITLE}
Josephrp
120 × 75 mm340 parts4LCustom license12NXP
${TITLE}
greearb
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
JensLiu
120 × 75 mm340 parts4LGPL-2.01NXP
${TITLE}
deepin-community
120 × 75 mm340 parts4LGPL-2.00
How designs wire the RFFC5072TR7
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the RFFC5072TR7 connects to, and the resistors, capacitors and other passives placed on it.
- The REXT pin has a resistor to GND on 6 of 6 designs, most often 51 kΩ.
- The ANA_VDD1 pin has a capacitor to GND on 6 of 6 designs, most often 33 pF (then 10 nF).
- The ANA_VDD1 pin has a inductor on 6 of 6 designs, most often 10 µH (then 100 µH).
- The LFILT1 pin has a series capacitor on 6 of 6 designs, most often 8.2 pF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| EPpin 0 | Connected to: GND 100% | — |
| ENBL/GPO5pin 1 | Connected to: Not connected 83% · a signal 17% | — |
| EXT_LOpin 2 | Connected to: Not connected 100% | — |
| EXT_LO_DECpin 3 | Connected to: Not connected 100% | — |
| REXTpin 4 | Connected to: Signal 100% |
|
| ANA_VDD1pin 5 | Connected to: SKY13453-385LF 83%, MAX2837ETM+T 67%, MAX5864ETM+T 67% |
|
| LFILT1pin 6 | Connected to: Signal 100% |
|
| LFITLT2pin 7 | Connected to: Signal 100% |
|
| LFILT3pin 8 | Connected to: Signal 100% |
|
| REF_INpin 10 | Connected to: A connector 67% |
|
| NCpin 11, 13, 14, 17, 18, 20, 21 | Connected to: Not connected 100% | — |
| TMpin 12 | Connected to: GND 100% | — |
| GPO1/ADD1pin 15 | Connected to: A connector 67% · not connected 33% |
|
| DIG_VDDpin 19 | Connected to: VCC 67% · a signal 33% |
|
| ANA_VDD2pin 22 | Connected to: SKY13453-385LF 83%, MAX2837ETM+T 67%, MAX5864ETM+T 67% |
|
| MIX_IPPpin 23 | Connected to: Signal 100% |
|
| MIX_IPNpin 24 | Connected to: Signal 100% |
|
| MIX_OPNpin 27 | Connected to: Signal 100% |
|
| MIX_OPPpin 28 | Connected to: Signal 100% |
|
| RESETXpin 29 | Connected to: The microcontroller 100%, a connector 83% |
|
| ENXpin 30 | Connected to: The microcontroller 100%, a connector 83% |
|
| SCLKpin 31 | Connected to: The microcontroller 100%, a connector 83% |
|
| SDATApin 32 | Connected to: The microcontroller 100%, a connector 83% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Hackrf pro by greatscottgadgets, ${TITLE} by Josephrp, HackRf-Circuit-Board-KiCad by GitByKaliMeNope and ${TITLE} by greearb.
The RFFC5072TR7 in open source designs
The gallery holds 7 open source boards using the RFFC5072TR7 from 7 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 340 components.
100% use four copper layers or more, and 86% carry an open source license.
The most starred is Illacceptanything by illacceptanything.
Parts used alongside the RFFC5072TR7
What boards using the RFFC5072TR7 are built for
RFFC5072TR7: common questions
Where can I find a RFFC5072TR7 reference design?
Each of the 7 boards on this page is a real design using the RFFC5072TR7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the RFFC5072TR7 REXT pin?
The REXT pin has a resistor to GND on 6 of 6 designs, most often 51 kΩ. Counted from the KiCad layouts of 6 open source designs using the RFFC5072TR7.
How is the RFFC5072TR7 ANA_VDD1 pin connected?
The ANA_VDD1 pin has a capacitor to GND on 6 of 6 designs, most often 33 pF (then 10 nF). Counted from the KiCad layouts of 6 open source designs using the RFFC5072TR7.
How is the RFFC5072TR7 LFILT1 pin connected?
The LFILT1 pin has a series capacitor on 6 of 6 designs, most often 8.2 pF. Counted from the KiCad layouts of 6 open source designs using the RFFC5072TR7.
What parts are used alongside the RFFC5072TR7?
The TPS62410DRCR, DEA162400HT-8004B1, LP0603A1880ANTR, LPC4320FBD144,551 and MGA-81563-TR1G appear in the most repositories here.
Which microcontrollers do boards using the RFFC5072TR7 use?
Most are built on NXP (6) and FPGA (1).
How big is a typical board using the RFFC5072TR7?
The median is 120 × 75 mm, and 0% are two-layer designs.
What is the most popular open source board using the RFFC5072TR7?
By GitHub stars, Illacceptanything by illacceptanything, with 1,961 stars.
Can I simulate one of these boards using the RFFC5072TR7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.